GEOS-Chem 13.4.0: Difference between revisions

From Geos-chem
Jump to navigation Jump to search
Line 21: Line 21:


|-valign="top"
|-valign="top"
|[https://github.com/geoschem/geos-chem/pull/1190 Fix parallelization errors in GEOS-Chem Classic and add updates for better numerical stability]
|[https://github.com/geoschem/geos-chem/pull/1054 Migrate sulfate chemistry into KPP]
|Bob Yantosca (GCST)
|Mike Long (Harvard)<br>Viral Shah (Harvard)<br>Bob Yantosca (GCST)
|Bug fix<br>Structural
|Chemistry
|
* [https://github.com/geoschem/geos-chem/pull/1054 geoschem/geos-chem PR #1054]
 
|-valign="top"
|[https://github.com/geoschem/geos-chem/issues/1139 Convert the HOCl & HOBr reactions with dissolved SO2 to use gas phase SO2]
|Mike Long (Harvard)
|Chemistry
|
|
* [https://github.com/geoschem/geos-chem/pull/1190 geoschem/geos-chem PR #1190]
*[https://github.com/geoschem/geos-chem/pull/1170 geoschem/geos-chem PR #1170]


|-valign="top"
|-valign="top"
|[https://github.com/geoschem/geos-chem/issues/1145 Turn off sea salt debromination by default]
|[https://github.com/geoschem/geos-chem/issues/1145 Turn off sea salt debromination by default]
|Viral Shah (Harvard)<br>Melissa Sulprizio (GCST)
|Viral Shah (Harvard)<br>Melissa Sulprizio (GCST)
|Chemistry
|Chemistry &<br>Emissions
|
|
* [https://github.com/geoschem/geos-chem/pull/1177 geoschem/geos-chem PR #1177]
* [https://github.com/geoschem/geos-chem/pull/1177 geoschem/geos-chem PR #1177]
* [https://github.com/geoschem/geos-chem/issues/1145 geoschem/geos-chem #1145]
* [https://github.com/geoschem/geos-chem/issues/1145 geoschem/geos-chem #1145]
|-valign="top"
|[https://github.com/geoschem/geos-chem/pull/1054 Migrating sulfate chemistry into KPP]
|Mike Long (GCST)<br>Viral Shah (Harvard)<br>Bob Yantosca (GCST)
|Chemistry &<br>Structural
|
* [https://github.com/geoschem/geos-chem/pull/1054 geoschem/geos-chem PR #1054]


|-valign="top"
|-valign="top"
Line 61: Line 61:
|[https://github.com/geoschem/geos-chem/issues/997 Update surface resistance for ozone deposition to ice/snow]
|[https://github.com/geoschem/geos-chem/issues/997 Update surface resistance for ozone deposition to ice/snow]
|Ryan Pound (York)<br>Shuting Zhai (UW)
|Ryan Pound (York)<br>Shuting Zhai (UW)
|Drydep
|Dry deposition
|
|
*[https://github.com/geoschem/geos-chem/pull/1055 geoschem/geos-chem PR #1055]
*[https://github.com/geoschem/geos-chem/pull/1055 geoschem/geos-chem PR #1055]
*[https://github.com/geoschem/geos-chem/issues/997 geoschem/geos-chem #997]
*[https://github.com/geoschem/geos-chem/issues/997 geoschem/geos-chem #997]
|-valign="top"
|[https://github.com/geoschem/geos-chem/pull/992 Use updated definition of PM2.5; Add PM10 diagnostic]
|Bob Yantosca (GCST)
|Diagnostics &<br>Benchmarking
|
*[https://github.com/geoschem/geos-chem/pull/992 geoschem/geos-chem PR #992]
*[https://wiki.geos-chem.org/Particulate_matter_in_GEOS-Chem Particulate Matter in GEOS-Chem (wiki)]


|-valign="top"
|-valign="top"
Line 89: Line 81:


|-valign="top"
|-valign="top"
|[https://github.com/geoschem/geos-chem/pull/945 Add option for driving GEOS-Chem with native GEOS meteorological files]
|[https://github.com/geoschem/geos-chem/issues/1158 Fix end year for CEDS NO ship and MULTISEAICE entries in HEMCO_Config.rc]
|Liam Bindle (GCST)
|Liam Bindle (GCST)
|Emissions
|
*[https://github.com/geoschem/geos-chem/pull/1159 geoschem/geos-chem PR #1159]
|-valign="top"
|[https://github.com/geoschem/geos-chem/pull/1190 Fix parallelization errors in GEOS-Chem Classic and add updates for better numerical stability]
|Bob Yantosca (GCST)
|Structural
|Structural
|
|
* [https://github.com/geoschem/geos-chem/pull/945 geoschem/geos-chem PR #945]
* [https://github.com/geoschem/geos-chem/pull/1190 geoschem/geos-chem PR #1190]
* [https://github.com/geoschem/GCHP/pull/164 geoschem/GCHP PR #164]
 
* [https://github.com/geoschem/HEMCO/pull/113 geoschem/HEMCO PR #113]
|-valign="top"
|[https://github.com/geoschem/geos-chem/pull/992 Use updated definition of PM2.5; Add PM10 diagnostic]
|Bob Yantosca (GCST)
|Diagnostics &<br>Benchmarking
|
*[https://github.com/geoschem/geos-chem/pull/992 geoschem/geos-chem PR #992]
*[https://wiki.geos-chem.org/Particulate_matter_in_GEOS-Chem Particulate Matter in GEOS-Chem (wiki)]
 


|-valign="top"
|-valign="top"
Line 189: Line 195:
|
|
* [https://github.com/geoschem/geos-chem/pull/1148 geoschem/geos-chem PR #1148]
* [https://github.com/geoschem/geos-chem/pull/1148 geoschem/geos-chem PR #1148]
|-valign="top"
|[https://github.com/geoschem/geos-chem/pull/1120 Add capability to write GEOS-Chem Classic timers to JSON file]
|Bob Yantosca (GCST)
|Diagnostics
|
* [https://github.com/geoschem/geos-chem/pull/1120 geoschem/geos-chem PR #1120]


|-valign="top"
|-valign="top"
|[https://github.com/geoschem/geos-chem/issues/1127 Update tagged Ox simulation to use archived prod/loss rates from GEOS-Chem and retire Linoz]
|[https://github.com/geoschem/geos-chem/issues/1127 Update tagged Ox simulation to use archived prod/loss rates from GEOS-Chem and retire Linoz]
|GCST
|Bob Yantosca (GCST)
|Specialty simulation
|Specialty simulation
|
|
Line 213: Line 226:
|
|
*[https://github.com/geoschem/GCHP/pull/172 geoschem/GCHP PR #172]
*[https://github.com/geoschem/GCHP/pull/172 geoschem/GCHP PR #172]
|-valign="top"
|[https://github.com/geoschem/geos-chem/pull/945 Add option for driving GCHP with native GEOS meteorological files]
|Liam Bindle (GCST)
|Structural
|
* [https://github.com/geoschem/geos-chem/pull/945 geoschem/geos-chem PR #945]
* [https://github.com/geoschem/GCHP/pull/164 geoschem/GCHP PR #164]
* [https://github.com/geoschem/HEMCO/pull/113 geoschem/HEMCO PR #113]


|-valign="top"
|-valign="top"

Revision as of 17:01, 4 April 2022

GEOS-Chem Versions Page

This page includes information about GEOS-Chem 13.4.0 (currently under development)

Version overview

The following items have been added to GEOS-Chem 13.4.0 since the last GEOS-Chem version GEOS-Chem 13.3.4. Also see the following Github pages:

Feature Contributor(s) Model scope Notes and references
Updates that will affect full-chemistry benchmark simulations
Migrate sulfate chemistry into KPP Mike Long (Harvard)
Viral Shah (Harvard)
Bob Yantosca (GCST)
Chemistry
Convert the HOCl & HOBr reactions with dissolved SO2 to use gas phase SO2 Mike Long (Harvard) Chemistry
Turn off sea salt debromination by default Viral Shah (Harvard)
Melissa Sulprizio (GCST)
Chemistry &
Emissions
Fix bug in Henry law CALC_HEFF routine in hetchem computations Viral Shah (Harvard) Chemistry
Bug fix: Remove double-counting of HCl uptake on acidic sea salt Viral Shah (Harvard) Chemistry
Update surface resistance for ozone deposition to ice/snow Ryan Pound (York)
Shuting Zhai (UW)
Dry deposition
AEIC 2019 aircraft emissions inventory Seb Eastham (MIT)
Thibaud Fritz (MIT)
Emissions
Use degassing-only volcano emissions in GEOS-Chem benchmark simulations Christoph Keller (GMAO)
Daniel Jacob (Harvard)
Emissions &
Benchmarking
Fix end year for CEDS NO ship and MULTISEAICE entries in HEMCO_Config.rc Liam Bindle (GCST) Emissions
Fix parallelization errors in GEOS-Chem Classic and add updates for better numerical stability Bob Yantosca (GCST) Structural
Use updated definition of PM2.5; Add PM10 diagnostic Bob Yantosca (GCST) Diagnostics &
Benchmarking


Updates that will NOT affect full-chemistry benchmark simulations
Updated Hg chemistry in KPP Viral Shah (Harvard)
Colin Thackray (Harvard)
Mike Long (GCST)
Bob Yantosca (GCST)
Chemistry
Bug fix: Use REAL*8 precision in for CH3O2 + OH reaction definition in fullchem.eqn Bob Yantosca (GCST) Chemistry
Updated Global Inventory of Methane Emissions from Oil/Gas/Coal (GFEI v2) Tia Scarpelli (U. Edinburgh)
Melissa Sulprizio (GCST)
Emissions
Anthropogenic Methane Emission Inventory for Canada Tia Scarpelli (U. Edinburgh)
Melissa Sulprizio (GCST)
Emissions
Use EDGARv6 global anthro emissions for CH4 simulation Melissa Sulprizio (GCST) Emissions
Updated Rn-222 emissions for TransportTracers simulations Bo Zhang (NIA) Emissions
Retire HEMCO extension for CH4 wetland emissions Melissa Sulprizio (GCST) Emissions
Updates to enable automated run directory creation Liam Bindle (GCST)
Melissa Sulprizio (GCST)
Run directory
Bug fix: Allow GEOS-Chem Classic History to archive irregular intervals (e.g. a month and a day) Bob Yantosca (GCST) Diagnostics
Updates for running GEOS-Chem within GEOS Christoph Keller (GMAO)
Lizzie Lundgren (GCST)
GEOS
Add CH4 pseudo flux diagnostic Christoph Keller (GMAO) Diagnostics
Add capability to write GEOS-Chem Classic timers to JSON file Bob Yantosca (GCST) Diagnostics
Update tagged Ox simulation to use archived prod/loss rates from GEOS-Chem and retire Linoz Bob Yantosca (GCST) Specialty simulation
Updates that will only affect GCHP
Add capability to use mass fluxes in advection Sebastian Eastham (MIT)
Liam Bindle (GCST)
Advection
Switch advection to use total pressure (rather than dry) Sebastian Eastham (MIT)
Liam Bindle (GCST)
Advection
Add option for driving GCHP with native GEOS meteorological files Liam Bindle (GCST) Structural
Add diagnostic for vertical air movement (vertical mass flux) Liam Bindle (GCST) Diagnostics
Define a GCHP "Default" diagnostic collection that will archive a small number of commonly-requested diagnostic fields Liam Bindle (GCST) Structural
Add capability to read native meteorological data files Liam Bindle (GCST)
Bob Yantosca (GCST)
Structural
Fix communicators leak Weiyuan Jiang (GSFC) Bug fix


Fix unintuitive error handling when untemplated file is missing Sebastian Eastham (MIT) Bug fix
Fix incorrect output file timestamp with 24-hour duration and 1-hour frequency Atanas Troyanov (GMAO) Bug fix
Fix units in FV3 mass flux variable that impacted vertical mass flux diagnostic Bill Putman (GMAO) Bug fix
Move call to setup_wetscav to prevent zero C_H2O used in wet scavening in first timestep Lizzie Lundgren (GCST) Bug fix

New data directories

The following data directories have been added or updated in this version. You will have to download the directories relevant to your simulation.

Inventory Simulations What was added? Directory
AEIC2019
  • fullchem
  • aerosol-only
  • tagCO
  • CO2
Aircraft emissions (with prior year scaling factors) from the AEIC inventory.
  • NOTE: Monthly-mean is the default, but daily emissions are also available for research purposes.
ExtData/AEIC2019/v2022-03/
Updated CH4 anthropogenic emissions:
  • CH4
  • IMI
ExtData/HEMCO/CH4/v2022-01
Updated Hg simulation restart file
  • Hg
Sample restart file for the updated Hg mechanism. See Viral Shah et al (2021) ExtData/GEOSCHEM_RESTARTS/v2021-12
Updated TOMAS simulation restart files
  • TOMAS
Added HSO3m and SO3mm species to TOMAS restart files ExtData/GEOSCHEM_RESTARTS/v2021-12
ZHANG_Rn222
  • TransportTracers
Updated Rn222 emissions for TransportTracers simulations. See Bo Zhang et al (2021) ExtData/HEMCO/ZHANG_Rn222/v2021-11

Notes for viewing benchmark plots

  1. Enable PDF bookmarks in the file links to navigate between species. If you do not see bookmarks in your browser try using a different browser (not Safari) or installing an Adobe Acrobat plug-in.
  2. See the species database for species definitions and details.
  3. Species categories and lumped species are defined in YAML files within the GEOS-Chem post-processing software GCPy.

1-month full-chemistry benchmarks

1-month benchmark setup

The following table describes the GEOS-Chem setup for both GEOS-Chem Classic and GCHP 1-month benchmark simulations.

Git tag(s):
  • GEOS-Chem Classic: 13.4.0-rc.0
  • GCHP: 13.4.0-rc.1
    • NOTE: 13.4.0-rc.1 corrects typos in the GCHP HEMCO_Config.rc fullchem template file that were present in 13.4.0-rc.0. This caused emission differences w/r/t GC-Classic 13.4.0-rc.0. Because this only affected GCHP, we did not return the GC-Classic benchmark.
  • HEMCO: 3.4.0-rc.0
Compared to previous benchmark: 13.3.0
Software environment: gcc 10.2.0
OpenMPI 4.1.0
netcdf-fortran 4.5.3
CMake 3.17.3
ESMF 8.0.1
Model resolution:
  • GEOS-Chem Classic: 4° x 5°
  • GCHP: c48
Meteorology fields: MERRA-2
  • GEOS-Chem Classic: 4° x 5°
  • GCHP: 0.5° x 0.625°
Initial conditions: July 1, 2019
  • NOTE: GCHP c48 restart file regridded from GEOS-Chem Classic 4° x 5°
Benchmark month: July 2019
Emissions setup: HEMCO_Config.rc
Chemistry setup: fullchem.eqn
This version will impact:
(select all that apply with boldface)
  • Emissions
  • Photolysis
  • Chemistry
  • Dry Deposition
  • Wet Deposition
  • Advection
  • BL Mixing
  • Convection
  • Meteorology Fields
  • Other (please specify):
    • Run directory creation scripts

1-month benchmark assessment form

Performance GEOS-Chem Classic (rc.0) GCHP (rc.2)
Grid resolution: 4° x 5° C48
# CPUs, nodes: 48 CPUs
1 node (Intel Cascade Lake)
96 CPUs
2 nodes (Intel Cascade Lake)
Wall time: 03:37:13 06:02:38
CPU time / wall time: 31.79 95.31
% of ideal performance: 66.23% 97.3%
Memory: 11.4128 GB 106 GB
Global mean OH:
(% change from previous version)
11.70790814279 x 105 molec/cm3
(-0.329%)
11.63793080268 x 105 molec/cm3
(-0.377%)
Methyl chloroform lifetime:
(% change from previous version)
5.294530 years
(+0.557%)
5.332938 years
(+0.609%)
Methane lifetime:
(% change from previous version)
8.923431 years
(+0.581%)
8.988413 years
(+0.632%)
Details
Species, J-Values, and COLUMN AOD values that changed by 10% or more at the surface: GEOS-Chem Classic
13.4.0-rc.1 vs. 13.3.0-rc.0
GCHP 13.4.0-rc.2 vs. 13.3.0-rc.0
Species and J-Values that changed by 10% or more at 500 hPa: GEOS-Chem Classic
13.4.0-rc.1 vs. 13.3.0-rc.0
GCHP 13.4.0-rc.2 vs. 13.3.0-rc.0
Species and J-Values that changed by 10% or more in zonal mean: GEOS-Chem Classic
13.4.0-rc.1 vs. 13.3.0-rc.0
GCHP 13.4.0-rc.2 vs. 13.3.0-rc.0
Emissions that changed by 10% or more: GEOS-Chem Classic
13.4.0-rc.1 vs. 13.3.0-rc.0
GCHP 13.4.0-rc.2 vs. 13.3.0-rc.0
Overview
Below we summarize the notable changes caused by specific updates. Supplementary plots may be viewed at http://ftp.as.harvard.edu/gcgrid/geos-chem/validation/InternalBenchmarks/13.4.0/.

1. Migrating sulfate chemistry into KPP

An error in GEOS-Chem 13.3.0 meant that HMS chemistry was not properly implemented. This has now been fixed in 13.4.0-rc.0 (see this plot).

Furthermore, this update causes the global tropospheric mass of BrO to increase by 11%:

                        before    after      diff      % diff
   BrO trop mass [Gg] : 9.543837  10.623180  1.079344  11.309

This increase (see plot) seems to be caused by the sulfur reactions on sea salt that were added to the KPP-generated chemical mechanism. The area of greatest change of BrO is at the surface southern extratropics, an area of high sea salt emissions. We are investigating further.

Other changes in benchmark output related to this update are:

  • Very small changes in OH Metrics (mean OH +0.0004%)
  • Small changes in Oxidants concentrations.
  • SO2 at surface decreases by ~10%.
  • Large SO4 decreases (~50%) in the boreal forest regions of Canada & Russia.

2. Fix bug in Henry law CALC_HEFF routine in hetchem computations

This update causes the global tropospheric mass of BrO to increase by 15%:

                        before    after     diff      % diff
   BrO trop mass [Gg} : 8.358857  9.663602  1.304745  15.609

Other changes in benchmark output related to this update are:

  • Very small changes in the OH metrics (mean OH -0.0698%, MCF lifetime +0.10%; CH4 lifetime +0.05%)
  • Small changes in Trop+Strat masses for most species.
  • Cl/Br species concentrations have significant changes primarily in the extratropics.

3. Fix scale factors applied to VOC aircraft emissions in AEIC inventory

The updated scale factors, which correct the conversion from atoms C to kg species, result in significant decreases in emissions for VOC species. This occurs mostly in the northern hemisphere and up to the lower stratosphere (where most aircraft emissions are placed).

   ###################################################################################
   ### Emissions totals for inventory AEIC [Tg]                                    ###
   ### Ref = GCC_13.3.0-rc.1; Dev = GCC_13.4.0-rc.0                                ###
   ###################################################################################
                                   Ref                 Dev          Dev - Ref    % diff
    AEIC ACET          :           0.000139            0.000086     -0.000053   -38.027
    AEIC ALD2          :           0.001829            0.000996     -0.000833   -45.529
    AEIC ALK4          :           0.005617            0.004274     -0.001343   -23.912
    AEIC C2H6          :           0.000152            0.000122     -0.000031   -20.213
    AEIC C3H8          :           0.000022            0.000018     -0.000004   -18.386
    AEIC MACR          :           0.001827            0.000100     -0.001727   -94.522
    AEIC PRPE          :           0.004855            0.003779     -0.001076   -22.168
    AEIC RCHO          :           0.001384            0.003358      0.001974   142.621

However, this update resulted in minimal changes to global quantities, as VOC aircraft emissions are typically less than 1Gg for the simulation month.

Other changes in benchmark output related to this update are:

  • Very small changes in oxidants (too small to show up in ratio plots).
  • Slight change in most primary organics, but % differences are of order 1e-4 or 1e-5.
  • Some zonal mean plots show diffs at top of atm where conc's are already low.
  • Mean OH decreased by -0.005%, CH4 and MCF increasd by +0.006%.
  • Very small changes in mass for most species.

4. Bug fix: Remove double-counting of HCl uptake on acidic sea salt

This update causes the global tropospheric mass of BrO to increase by 13%:

                 before    after     diff      % diff
   alpha.4 BrO : 7.354777  8.358857  1.004080  13.652

Other changes in benchmark output related to this update are:

  • As expected, chlorine species concentrations decrease in the southern latitudes (esp. at about 40S), where there is more sea salt (and now less removal of HCl due to the bug fix).
  • Some increase of Cl species concentrations at northern latitudes are observed.
  • Cly concentrations generally increase.
  • Very small chagnes in OH metrics as well (mean OH -0.03% change).

5. Update surface resistance for ozone deposition to ice/snow

Barten et.al 2021 (https://doi.org/10.5194/acp-21-10229-2021) increased the surface resistance of ozone dry deposition to snow and ice to 1E4 s m−1, this results in a reduction of ozone deposition velocity to ice of <= 0.01 cm s−1 (~ 66% reduction) which has better agreement with observations and results in improved comparison between Ozone observations in the arctic.

Changes in benchmark output related to this update are:

  • Increase in O3 concentration at the summer polar latitudes (i.e. deposition to ice/snow is suppressed);
  • Minor change in other oxidants;
  • Neglible effect on OH metrics;
  • Neglible change in species mass (O3 only increases by 0.01%).

6. HEMCO bug fix: restore archiving via manual diagnostics (which had been inadvertently disabled in a prior update)

This update was added in 13.3.3 but does cause very slight changes in NOx soil and fertilizer emissions, as shown below. The HEMCO soil NOx extension uses an manual diagnostic to keep track of NOx from fertilizers.

     ###################################################################################
     ### Emissions totals for species NO [Tg]                                        ###
     ### Ref = GCC_13.3.0-rc.1; Dev = GCC_13.4.0-rc.0                                ###
     ###################################################################################
                                         Ref                 Dev     Dev - Ref    % diff
     NO Aircraft        :           0.156922            0.156922      0.000000     0.000
     NO Anthro          :           5.327773            5.327773      0.000000     0.000
     NO BioBurn         :           1.882279            1.882279      0.000000     0.000
     NO Fert            :           0.359627            0.359458     -0.000169    -0.047
     NO Lightning       :           1.664984            1.664984      0.000000     0.000
     NO Ship            :           0.073301            0.074878      0.001577     2.152
     NO Soil            :           1.745616            1.745500     -0.000115    -0.007
     -----------------------------------------------------------------------------------
     NO Total           :          10.850869           10.852331      0.001462     0.013

7. Use degassing-only volcano emissions in GEOS-Chem benchmark simulations

Removing eruptive volcanoes from the benchmark simulations reduces the amount of SO2 emitted by 1%:

     ###################################################################################
     ### Emissions totals for species SO2 [Tg]                                       ###
     ### Ref = GCC_13.3.0-rc.1; Dev = GCC_13.4.0-rc.0                                ###
     ###################################################################################
                                    Ref                 Dev           Dev - Ref    % diff
     SO2 Aircraft       :           0.019036            0.019036      0.000000     0.000
     SO2 Anthro         :           5.872509            5.872509      0.000000     0.000
     SO2 BioBurn        :           0.555350            0.555350      0.000000     0.000
     SO2 Ship           :           0.951114            0.951114      0.000000     0.000
     SO2 VolcDegas      :           1.826465            1.826465      0.000000     0.000
     SO2 VolcErupt      :           0.101063            0.000000     -0.101063  -100.000
     -----------------------------------------------------------------------------------
     SO2 Total          :           9.325534            9.224471     -0.101063    -1.084

Other changes in benchmark output related to this update are:

  • OH metrics show very small change;
  • SO2 mass changes by -9%, SO4 by -4.6%, NIT by +4.3%, NH3 by +1.5%, NH4 by -1.1%.
  • Some gas phase species show corresponding mass changes (e.g.ITCN & ITHN, +1.3%, KO2, -0.49%, MCHRN ; 5 S+0.8; *Other species mass change typically by +/- 0.5%;
  • Minor decreases in SOx concentration at surface observed over SA, Africa, Indonesia, Australia.

8. Add option for driving GEOS-Chem & GCHP with native GEOS meteorological files

Changes in benchmark output related to this update are:

  • Very small changes in OH metrics (mean OH -0.007%, MCF lifetime +0.011%, CH4 lifetime +0.011%)
  • Mostly small changes in species mass (typically less than +/- 1%), except for a few species such as ACET, ATO2, BrSALA, which are larger;
  • Minor differences in species concentration in the polar regions due to the removal of ALBEDO as a proxy for snow/ice.

The following were zero-difference updates:

  1. GCHP-specific updates:
  2. CH4 simulation updates:
  3. Hg simulation updates:
  4. TransportTracers simulation updates:
  5. Diagnostic updates:
  6. Other updates:


Approval
Requires further investigation:
Approved by:
Date of approval:

1-month GEOS-Chem Classic version comparison (13.4.0-rc.0 vs 13.3.0-rc.1)

Below are links to plots and tables comparing 1-month simulations for GEOS-Chem Classic 13.4.0-rc.0 (Dev) and GEOS-Chem Classic 13.3.0-rc.1 (Ref).

Species Category Plots Additional Information
Level Map Zonal Mean Emissions
Oxidants

O3, CO, OH, NOx

sfc 500hPa full column stratosphere sfc
Aerosols

DST1, DST2, DST3, DST4, NH4, NIT, SO4, HMS, BCPI, BCPO, OCPI, OCPO, AERI, BrSALA, BrSALC, ISALA, ISALC, NITs, SALA, SALC, SO4s, Simple_SOA, Complex_SOA, pFe

sfc 500hPa full column stratosphere column total AOD
Bromine

Bry, BrOx, Br, Br2, BrCl, BrNO2, BrNO3, BrO, CH3Br, CH2Br2, CHBr3, HOBr, HBr

sfc 500hPa full column stratosphere column total
Chlorine

Cly, ClOx, Cl, ClO, Cl2, Cl2O2, ClOO, ClNO2, ClNO3, CCl4, CFCs, CH3Cl, CH2Cl2, CH3CCl3, CHCl3, HOCl, HCl, Halons, HCFCs, OClO

sfc 500hPa full column stratosphere --
Iodine

Iy, IxOy, I, I2, IBr, ICl, IO, IONO, IONO2, CH3I, CH2I2, CH2ICl, CH2IBr, HI, HOI, OIO

sfc 500hPa full column stratosphere column total
Nitrogen

NOy, NOx, HNO2, HNO3, HNO4, MPAN, NIT, NO, NO2, NO3, N2O5, MPN, PAN, PPN, N2O, NHx, NH3, NH4, MENO3, ETNO3, IPRNO3, NPRNO3, AONITA, ETHN, BZPAN, NPHEN

sfc 500hPa full column stratosphere column total
Primary Organics

EOH, MOH, ISOP, MTPA, MTPO, LIMO, ALK4, BENZ, CH4, C2H2, C2H4, C2H6, C3H8, PRPE, TOLU, XYLE

sfc 500hPa full column stratosphere column total
Secondary Organics

ACTA, ALD2, BALD, CH2O, HPALDs, MACR, IEPOX, ACET, HAC, MEK, MVK, ISOPN, GLYC, GLYX, HCOOH, MAP, PHEN, RCHO, ETHP, MP

sfc 500hPa full column stratosphere column total
Secondary Organic Aerosols

TSOA0, TSOA1, TSOA2, TSOA3, ASOA1, ASOA2, ASOA3, ASOAN, TSOG0, TSOG1, TSOG2, TSOG3, ASOG1, ASOG2, ASOG3, INDIOL, LVOCOA, SOAIE, SOAGX, SOAP, SOAS

sfc 500hPa full column stratosphere column total
Sulfur

SOx, DMS, HMS, OCS, SO2, SO4

sfc 500hPa full column stratosphere column total
ROy

H2O2, H, H2, H2O, HO2, O1D, OH, RO2

sfc 500hPa full column stratosphere --
J-values sfc 500hPa full column stratosphere -- --
 
Emissions by HEMCO category Total

Aircraft, Anthropogenic, Biomass Burning, Biogenic, Lightning, Natural, Ocean, Seabirds, Decaying Plants, Ship, Soil, Degassing Volcanoes, Erupting Volcanoes

Emission totals Tables by species

Tables by inventory

Global mass Entire atmosphere

Troposphere only

Metrics OH concentration, MCF lifetime, CH4 lifetime

1-month GCHP version comparison (13.4.0-rc.2 vs 13.3.0-rc.1)

Below are links to plots and tables comparing 1-month simulations for GCHP 13.4.0-rc.2 (Dev) and GCHP 13.3.0-rc.1 (Ref).

Species Category2 Plots Additional Information
Level Map Zonal Mean Emissions
Oxidants

O3, CO, OH, NOx

sfc 500hPa full column stratosphere column total
Aerosols

DST1, DST2, DST3, DST4, NH4, NIT, SO4, BCPI, BCPO, OCPI, OCPO, AERI, BrSALA, BrSALC, ISALA, ISALC, NITs, SALA, SALC, SO4s, Simple_SOA, Complex_SOA, pFe

sfc 500hPa full column stratosphere column total AOD
Bromine

Bry, BrOx, Br, Br2, BrCl, BrNO2, BrNO3, BrO, CH3Br, CH2Br2, CHBr3, HOBr, HBr

sfc 500hPa full column stratosphere column total
Chlorine

Cly, ClOx, Cl, ClO, Cl2, Cl2O2, ClOO, ClNO2, ClNO3, CCl4, CFCs, CH3Cl, CH2Cl2, CH3CCl3, CHCl3, HOCl, HCl, Halons, HCFCs, OClO

sfc 500hPa full column stratosphere --
Iodine

Iy, IxOy, I, I2, IBr, ICl, IO, IONO, IONO2, CH3I, CH2I2, CH2ICl, CH2IBr, HI, HOI, OIO

sfc 500hPa full column stratosphere column total
Nitrogen

NOy, NOx, HNO2, HNO3, HNO4, MPAN, NIT, NO, NO2, NO3, N2O5, MPN, PAN, PPN, N2O, NHx, NH3, NH4, MENO3, ETNO3, IPRNO3, NPRNO3

sfc 500hPa full column stratosphere column total
Primary Organics

EOH, MOH, ISOP, MTPA, MTPO, LIMO, ALK4, BENZ, CH4, C2H6, C3H8, PRPE, TOLU, XYLE

sfc 500hPa full column stratosphere column total
Secondary Organics

ACTA, ALD2, CH2O, HPALDs, MACR, IEPOX, ACET, HAC, MEK, MVK, ISOPN, GLYC, GLYX, HCOOH, MAP, RCHO, MP

sfc 500hPa full column stratosphere column total
Secondary Organic Aerosols

TSOA0, TSOA1, TSOA2, TSOA3, ASOA1, ASOA2, ASOA3, ASOAN, TSOG0, TSOG1, TSOG2, TSOG3, ASOG1, ASOG2, ASOG3, INDIOL, LVOCOA, SOAIE, SOAGX, SOAP, SOAS

sfc 500hPa full column stratosphere column total
Sulfur

SOx, DMS, HMS, OCS, SO2, SO4

sfc 500hPa full column stratosphere column total
ROy

H2O2, H, H2, H2O, HO2, O1D, OH, RO2

sfc 500hPa full column stratosphere --
J-values sfc 500hPa full column stratosphere -- --
 
Emissions by HEMCO category Total

Aircraft, Anthropogenic, Biomass Burning, Biogenic, Lightning, Natural, Ocean, Seabirds, Decaying Plants, Ship, Soil, Degassing Volcanoes, Erupting Volcanoes

Emission totals Tables by species

Tables by inventory

Global mass Entire atmosphere

Troposphere only

1-month GCHP (13.4.0-rc.2) vs. GEOS-Chem Classic (13.4.0-rc.0) comparison

Below are links to plots and tables comparing 1-month simulations for GCHP 13.4.0-rc.2 (Dev) and GEOS-Chem Classic 13.4.0-rc.0 (Ref).

Species Category2 Plots Additional Information
Level Map Zonal Mean Emissions
Oxidants

O3, CO, OH, NOx

sfc 500hPa full column stratosphere column total
Aerosols

DST1, DST2, DST3, DST4, NH4, NIT, SO4, BCPI, BCPO, OCPI, OCPO, AERI, BrSALA, BrSALC, ISALA, ISALC, NITs, SALA, SALC, SO4s, Simple_SOA, Complex_SOA, pFe

sfc 500hPa full column stratosphere column total AOD
Bromine

Bry, BrOx, Br, Br2, BrCl, BrNO2, BrNO3, BrO, CH3Br, CH2Br2, CHBr3, HOBr, HBr

sfc 500hPa full column stratosphere column total
Chlorine

Cly, ClOx, Cl, ClO, Cl2, Cl2O2, ClOO, ClNO2, ClNO3, CCl4, CFCs, CH3Cl, CH2Cl2, CH3CCl3, CHCl3, HOCl, HCl, Halons, HCFCs, OClO

sfc 500hPa full column stratosphere --
Iodine

Iy, IxOy, I, I2, IBr, ICl, IO, IONO, IONO2, CH3I, CH2I2, CH2ICl, CH2IBr, HI, HOI, OIO

sfc 500hPa full column stratosphere column total
Nitrogen

NOy, NOx, HNO2, HNO3, HNO4, MPAN, NIT, NO, NO2, NO3, N2O5, MPN, PAN, PPN, N2O, NHx, NH3, NH4, MENO3, ETNO3, IPRNO3, NPRNO3

sfc 500hPa full column stratosphere column total
Primary Organics

EOH, MOH, ISOP, MTPA, MTPO, LIMO, ALK4, BENZ, CH4, C2H6, C3H8, PRPE, TOLU, XYLE

sfc 500hPa full column stratosphere column total
Secondary Organics

ACTA, ALD2, CH2O, HPALDs, MACR, IEPOX, ACET, HAC, MEK, MVK, ISOPN, GLYC, GLYX, HCOOH, MAP, RCHO, MP

sfc 500hPa full column stratosphere column total
Secondary Organic Aerosols

TSOA0, TSOA1, TSOA2, TSOA3, ASOA1, ASOA2, ASOA3, ASOAN, TSOG0, TSOG1, TSOG2, TSOG3, ASOG1, ASOG2, ASOG3, INDIOL, LVOCOA, SOAIE, SOAGX, SOAP, SOAS

sfc 500hPa full column stratosphere column total
Sulfur

SOx, DMS, HMS, OCS, SO2, SO4

sfc 500hPa full column stratosphere column total
ROy

H2O2, H, H2, H2O, HO2, O1D, OH, RO2

sfc 500hPa full column stratosphere --
J-values sfc 500hPa full column stratosphere -- --
 
Emissions by HEMCO category Total

Aircraft, Anthropogenic, Biomass Burning, Biogenic, Lightning, Natural, Ocean, Seabirds, Decaying Plants, Ship, Soil, Degassing Volcanoes, Erupting Volcanoes

Emission totals Tables by species

Tables by inventory

Global mass Entire atmosphere

Troposphere only

1-month GCHP vs GEOS-Chem-Classic diff-of-diffs

Below are links to plots and tables comparing 1-month simulations for GCHP 13.4.0-rc.2 - 13.3.0-rc.1 (Dev) and GEOS-Chem Classic GCHP 13.4.0-rc.2 - 13.3.0-rc.1 (Ref).

Species Category2 Plots
Level Map Zonal Mean
Oxidants

O3, CO, OH, NOx

sfc 500hPa full column stratosphere
Aerosols

DST1, DST2, DST3, DST4, NH4, NIT, SO4, BCPI, BCPO, OCPI, OCPO, AERI, BrSALA, BrSALC, ISALA, ISALC, NITs, SALA, SALC, SO4s, Simple_SOA, Complex_SOA, pFe

sfc 500hPa full column stratosphere
Bromine

Bry, BrOx, Br, Br2, BrCl, BrNO2, BrNO3, BrO, CH3Br, CH2Br2, CHBr3, HOBr, HBr

sfc 500hPa full column stratosphere


Chlorine

Cly, ClOx, Cl, ClO, Cl2, Cl2O2, ClOO, ClNO2, ClNO3, CCl4, CFCs, CH3Cl, CH2Cl2, CH3CCl3, CHCl3, HOCl, HCl, Halons, HCFCs, OClO

sfc 500hPa full column stratosphere
Iodine

Iy, IxOy, I, I2, IBr, ICl, IO, IONO, IONO2, CH3I, CH2I2, CH2ICl, CH2IBr, HI, HOI, OIO

sfc 500hPa full column stratosphere


Nitrogen

NOy, NOx, HNO2, HNO3, HNO4, MPAN, NIT, NO, NO2, NO3, N2O5, MPN, PAN, PPN, N2O, NHx, NH3, NH4, MENO3, ETNO3, IPRNO3, NPRNO3

sfc 500hPa full column stratosphere
Primary Organics

EOH, MOH, ISOP, MTPA, MTPO, LIMO, ALK4, BENZ, CH4, C2H6, C3H8, PRPE, TOLU, XYLE

sfc 500hPa full column stratosphere
Secondary Organics

ACTA, ALD2, CH2O, HPALDs, MACR, IEPOX, ACET, HAC, MEK, MVK, ISOPN, GLYC, GLYX, HCOOH, MAP, RCHO, MP

sfc 500hPa full column stratosphere
Secondary Organic Aerosols

TSOA0, TSOA1, TSOA2, TSOA3, ASOA1, ASOA2, ASOA3, ASOAN, TSOG0, TSOG1, TSOG2, TSOG3, ASOG1, ASOG2, ASOG3, INDIOL, LVOCOA, SOAIE, SOAGX, SOAP, SOAS

sfc 500hPa full column stratosphere
Sulfur

SOx, DMS, OCS, SO2, SO4

sfc 500hPa full column stratosphere
ROy

H2O2, H, H2, H2O, HO2, O1D, OH, RO2

sfc 500hPa full column stratosphere

1-year full-chemistry benchmarks

1-year fullchem benchmark setup

The following table describes the GEOS-Chem setup for the GEOS-Chem Classic 1-year benchmark simulation.

Git tag(s): 13.4.0-rc.1
Compared to previous benchmark: GEOS-Chem 13.3.0-rc.0
Software environment: gcc 10.2.0
OpenMPI 4.1.0
netcdf-fortran 4.5.3
CMake 3.17.3
ESMF 8.0.1
Model resolution: 4° x 5°
Meteorology fields: MERRA-2 4° x 5°
Spin-up initial conditions: July 1, 2019 from 13.3.0 1-year benchmark
Benchmark date: Spin-up run: July 2018 - Dec 2018
Production run: Jan 2019 - Dec 2019

1-year fullchem GEOS-Chem Classic version comparison (13.4.0-rc.1 vs 13.3.0-rc.0)

Below are links to plots and tables comparing 1-year full-chemistry simulations for GEOS-Chem Classic 13.4.0 (Dev) and GEOS-Chem Classic 13.3.0 (Ref).

Category1 Plots Additional Information
Level Map Zonal Mean Emissions
Oxidants

O3, CO, OH, NOx

Surface 500 hPa Full column Stratosphere Full column
Aerosols

DST1, DST2, DST3, DST4, NH4, NIT, SO4, BCPI, BCPO, OCPI, OCPO, AERI, BrSALA, BrSALC, ISALA, ISALC, NITs, SALA, SALC, SO4s, Simple_SOA, Complex_SOA

Surface 500 hPa Full column Stratosphere Full column AOD

Aerosol profiles
Aerosol burdens
Global mean AOD

Bromine

Bry, BrOx, Br, Br2, BrCl, BrNO2, BrNO3, BrO, CH4Br, CH2Br2, CH2Br2, CH3Br3, HOBr, HBr

Surface 500 hPa Full column Stratosphere Full column
Chlorine

Cly, ClOx, Cl, ClO, Cl2, Cl2O2, ClOO, ClNO2, ClNO3, CCl4, CFCs, CH3Cl, CH2Cl2, CH4CCl3, HOCl, HCl, Halons, HCFCs, OClO

Surface 500 hPa Full column Stratosphere -
Iodine

Iy, IxOy, I, I2, IBr, ICl, IO, INO2, IONO2, CH3I, CH2I2, CH2ICl, CH2IBr, HI, HOI, OIO

Surface 500 hPa Full column Stratosphere Full column
Nitrogen

NOy, NOx, HNO2, HNO3, HNO4, MPAN, NIT, NO, NO2, NO3, N2O5, MPN, PAN, PPN, N2O, NHx, NH3, NH4, MENO3, ETNO3, IPRNO3, NPRNO3

Surface 500 hPa Full column Stratosphere Full column
Primary Organics

EOH, MOH, ISOP, MTPA, MTPO, LIMO, ALK4, BENZ, CH4, C2H6, C3H8, PRPE, TOLU, XYLE

Surface 500 hPa Full column Stratosphere Full column
Secondary Organics

ACTA, ALD2, CH2O, HPALDs, MACR, IEPOX, ACET, MEK, MVK, ISOPN, GLYX, HCOOH, MAP, RCHO, MP

Surface 500 hPa Full column Stratosphere Full column
Secondary Organic Aerosols

TSOA0, TSOA1, TSOA2, TSOA3, ASOA1, ASOA2, ASOA3, ASOAN, TSOG0, TSOG1, TSOG2, TSOG3, ASOG1, ASOG2, ASOG3, INDIOL, LVOCOA, SOAIE, SOAGX, SOAP, SOAS

Surface 500 hPa Full column Stratosphere Full column
Sulfur

SOx, DMS, OCS, SO2, SO4

Surface 500 hPa Full column Stratosphere Full column
ROy

H2O2, H, H2, H2O, HO2, O1D, OH, RO2

Surface 500 hPa Full column Stratosphere -
J-values Surface 500 hPa Full column Stratosphere -
 
Emissions by HEMCO category
Emission totals
Global mass
Metrics

OH concentration, MCF lifetime, CH4 lifetime

Strat-trop exchange
Model vs Observations

1-year transport tracers benchmarks

1-year transport benchmark setup

The following table describes the GEOS-Chem setup for both GEOS-Chem Classic and GCHP 1-year transport tracer benchmark simulations.

Git tag(s):
Compared to previous benchmark: 13.2.0-beta.0
Software environment:
  • gcc 10.2.0
  • OpenMPI 4.1.0
  • netcdf-fortran 4.5.3
  • CMake 3.17.3
  • ESMF 8.0.1
Model resolution: 4° x 5°
Meteorology fields: MERRA-2 4° x 5°
Spin-up initial conditions: January 1, 2019 from GEOS-Chem 13.0.0 1-year transport tracer benchmark
Benchmark date: Spinup run: Jan 2010 - Dec 2018
Production run: Jan 2019 - Dec 2019

1-year transport GEOS-Chem Classic version comparison (13.4.0-rc.1 vs 13.2.0-beta.0)

This table contains plots comparing 1-year transport tracer simulations for GEOS-Chem Classic 13.4.0-rc.1 (Dev) and GEOS-Chem Classic 13.2.0-beta.1 (Ref).

Category1 Plots
Level Map Zonal Mean
RnPbBeTracers

Rn222, Pb210, Pb210Strat, Be7, Be7Strat, Be10, Be10Strat

Surface 500 hPa Full column Stratosphere
PassiveTracers

PassiveTracer, SF6Tracer, CH3ITracer, COAnthroEmis25dayTracer, COAnthroEmis50dayTracer, COUniformEmis25dayTracer, GlobEmis90dayTracer, NHEmis90dayTracer, SHEmis90dayTrace

Surface 500 hPa Full column Stratosphere
WetLossConv

Pb210, Pb210Strat, Be7, Be7Strat, Be10, Be10Strat

Surface 500 hPa Full column Stratosphere
WetLossLS

Pb210, Pb210Strat, Be7, Be7Strat, Be10, Be10Strat

Surface 500 hPa Full column Stratosphere
 
Pb-Be Budgets GEOS-Chem 13.2.0-beta.0 (Ref): GEOS-Chem 13.4.0-rc.1 (Dev):
Strat-trop exchange GEOS-Chem 13.2.0-beta.0 (Ref): GEOS-Chem 13.4.0-rc.1(Dev):
Mass conservation Passive tracer