Using Git with GEOS-Chem: Difference between revisions

From Geos-chem
Jump to navigation Jump to search
(Redirected page to Guide to using Git with GEOS-Chem)
 
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
This page describes how to use the [[Version control with Git|Git version control system]] to download and manage the GEOS-Chem source code package.
#REDIRECT [[Guide to using Git with GEOS-Chem]]
 
== Obtaining and installing Git ==
 
You will need to make sure that Git is installed on your system.  Git is free, open-source software.  You may want to ask your sysadmin or IT department to install Git for you. Please see [[Version_control_with_Git#Obtaining_and_installing_Git|this wiki post]] for more information.
 
== Downloading a new GEOS-Chem version ==
 
=== Initial download ===
 
==== Code directory ====
 
The GEOS-Chem source code repository is available for remote download via Git.  We recommend that you download each new version of GEOS-Chem into a separate source code directory.
 
All users should use the following syntax:
 
git clone https://github.com/geoschem/geos-chem LOCAL_DIR_NAME
 
where <tt>LOCAL-DIR-NAME</tt> is the name of the local directory on your disk into which the GEOS-Chem source code files will be placed.  It is up to you to pick <tt>LOCAL-DIR-NAME</tt>.
 
For more information, please see [http://acmg.seas.harvard.edu/geos/doc/man/chapter_5.html Chapter 5: GEOS-Chem source code directory] in the GEOS-Chem Online User's Guide.
 
==== Run directories ====
 
There is a unique run directory for every combination of GEOS-Chem simulation type, grid resolution, meteorological data source, and nested region. A collection of GEOS-Chem run directories are stored in the GEOS-Chem Unit Tester which is available for download via Git. More information can be found on the following wiki pages:
 
*[[GEOS-Chem_Unit_Tester%23Installing_the_GEOS-Chem_Unit_Tester|Installing the GEOS-Chem Unit Tester]]
*[[Creating_GEOS-Chem_run_directories|Creating GEOS-Chem run directories]]
 
==== Shared data directories ====
 
The GEOS–Chem shared data directories contain the various met fields, emissions, and other data that GEOS–Chem will read in during the course of a simulation. You must download the shared data directories via FTP or a similar utility (e.g. wget, FireFTP, SecureFX, etc.) The large volume of data makes it impossible to track this directory structure with Git.
 
For more information about how to download these directories, please see [http://acmg.seas.harvard.edu/geos/doc/man/chapter_4.html Chapter 4: GEOS-Chem shared data directories] in the GEOS-Chem Online User's Guide.
 
=== Ignoring files ===
 
Git also allows you to ignore certain types of files that we don't need to track (e.g. anything that can be built from the source code).  These typically include:
 
* Object files <tt>(*.o)</tt>
* Library files <tt>(*.a)</tt>
* Module files <tt>(*.mod)</tt>
* Autosave files <tt>(*~)</tt>
* Executable files <tt>(geos, geostomas)</tt>
 
You can tell Git that you don't want these files to be tracked by editing the .gitignore file in your source code directory.  Open this file in your favorite text editor and edit it.
 
== Viewing the revision history ==
 
The best way to examine the contents of your Git-backed GEOS-Chem source code is to use the '''gitk''' viewer.  There are two ways to do this:
 
:(1) Change into your code directory and start '''gitk''' as follows:
 
        gitk --all &      # This will show ALL open branches
 
:(2) Or if you are using the '''git gui''' GUI browser ([[#Making revisions|more on that below]]), you can invoke '''gitk''' from the '''Repository/Visualize master's History''' menu item.
 
At the top left of the '''gitk''' screen, you will see the graph of revisions.  Each dot represents a commit, along with the log message that accompanied each commit. 
 
Note that at the most recent commit (i.e. the line at the very top) there are 2 green boxes, one labeled '''master''' and one labeled '''remotes/origin/master''':
 
#'''remotes/origin/master:''' This was the state of the repository on the remote server when you checked it out for the first time.  Therefore, this is the "pristine", unchanged code that you got from the download.
#'''master:''' This is the current state of the local repository now.  Since we haven't done anything to the code yet, '''master''' and '''remotes/origin/master''' point to the same commit.
 
If you click on any of the commits in the top left window, in the window below, you will see the log message and a list of changes to the source code.  The old code is marked in <span style="color:#FF0000">'''RED'''</span> and the new code is marked in <span style="color:#008000">'''GREEN'''</span>.  At right you will also see a list of files that were changed during the commit.
 
With '''gitk''', it's really easy to see how the code has evolved over time.
 
== Making revisions ==
 
=== Using the GUI browser ===
 
We recommend using the '''git gui''' for source code management.  Start this in your code directory:
 
      git gui &
 
On the left there are 2 windows:
 
#'''Unstaged Changes:''' An unstaged change is a modification that Git does not know about yet.  If you modified any files since the last commit, then they should be displayed in this window.  Also, right above this window you will find the name of the current checked-out branch.
#'''Staged Changes:''' These are changes that Git will add to the repository the very next time you make a commit.
 
In general, anytime you need to modify the source code, you should NOT do it on the '''master''' branch.  You should [[#Creating branches|create a new branch]] for your modifications.  Then you can test your modifications ad nauseum until you are sure that everything is functioning as it should.  When your modifications are complete, you can [[#merging|merge your branch]] into the '''master''' branch. You can then [[#Deleting branches|delete the branch]] you created. 
 
The advantage of this approach is that if you ever need to start over from scratch, you can just go back to the '''master''' branch and you will get back the state of the code before your modifications were added.
 
=== Creating branches ===
 
To create a new branch in Git GUI, go to the '''Branch/Create''' on the menu bar (or type '''CTRL-N''').  You will get a dialog box that prompts you for the new branch name.  Type a unique name and then click OK. 
 
You should pick names that have meaning to you.  Some good branch names are:
 
* Bug_fix_sulfate_mod
* CO2_simulation
* KPP_with_isoprene
* Methane_simulation
 
You will be automatically placed into the branch you have just created.
 
=== Committing ===
 
With Git, you should commit frequently, such as when you have completed making revisions to a file or group of files.  Commits that are made on one branch will not affect the other branches. 
 
Committing is best done with the '''git gui'''.  Follow these steps:
 
# Pick '''Commit/Rescan''' from the menu (or type the F5 key) to force the '''git gui''' to show the latest changes.
# You should get a list of files in the '''Unstaged Changes''' window.  Clicking on the icons on the left of the file names will send them to the '''Staged Changes''' window.  Git will add all of the files in '''Staged Changes''' to the repository on the next time you commit. Note: Clicking on the icon of the files in the '''Staged Changes''' moves back the file to the '''Unstaged Changes''' window.
# Type a '''Commit message''' in the bottom right window.  [https://github.com/erlang/otp/wiki/Writing-good-commit-messages See this example of a good commit message].  Some pointers are:
## The first line should only be 50 characters or less and succinctly describe the commit
## Then leave a blank line
## Then add more in-depth text that describes the commit
## Then click on the '''Signed-off by''' button.  This will add your name, email address, and a timestamp.
# There are two radio buttons above the '''Commit message''' window.
##New commit: This is the default.  Assumes we are making a totally new commit.
##Amend last commit: If for whatever reason we need to update the last commit message, pick this button.
# Click on the '''Commit''' button.
 
If you then [[#Viewing the revision history|start the '''gitk''' viewer]], your new commit should be visible.
 
=== Renaming files ===
 
In some instances you may find it necessary to rename files.  For example, in [[GEOS-Chem v9-01-02]], we have had to rename file ending in <tt>.f</tt> to  <tt>.F</tt> and <tt>.f90</tt> to <tt>.F90</tt>.  If only the name of the file changes, then Git will recognize it as a renamed file in the repository.  To rename a file, follow these steps:
 
# Change the name of the file with the Unix <tt>mv</tt> command.  For example: <tt>mv myfile.f myfile.F</tt>
# Open the '''git gui'''.  You will see the two files <tt>myfile.f</tt> and <tt>myfile.F</tt> listed in the '''Unstaged Changes''' window. 
#Click on <tt>myfile.f</tt> and <tt>myfile.F</tt>; this will move them to the '''Staged Changes''' window. 
# In '''Staged Changes''' you will see:
##File <tt>myfile.f</tt> is slated to be removed (i.e. a red "X" is listed next to the file name).
##File <tt>myfile.F</tt> is slated to be added (i.e. a green checkmark is listed next to the file name).
# Add a commit message, sign off, and click '''Commit''' [[#Committing|as described above]].
# Start the '''gitk''' browser.  In the lower left window, you should see text such as:
 
  ---------------- GeosCore/myfile.F --------------------------
  similarity index 100%
  rename from GeosCore/myfile.f
  rename to GeosCore/myfile.F
 
From this point forward, file <tt>myfile.F</tt> will use the <tt>*.F</tt> file extension.  However, it will still possess the total revision history from when the file was still named <tt>myfile.f</tt>.  If you merge changes from another repository that still has <tt>myfile.f</tt>, then these changes will be seamlessly integrated into <tt>myfile.F</tt>.
 
--[[User:Bmy|Bob Y.]] 10:19, 18 August 2011 (EDT)
 
=== Switching between branches ===
 
Before you switch from one branch to another (aka "checking out a branch"), it is recommended to [[#Committing|commit any remaining unstaged files]] to the current open branch.  Unstaged files will remain in your working directory even after you checkout a different branch.  This can potentially lead to confusion or may cause an error message from Git.
 
To checkout a new branch, go to '''Branch/Checkout''' on the menu and pick the name of the branch you would like to switch to.  The current branch name will be displayed just below the menu at top left.
 
Once you have created your branch and have checked it out, then you may begin making modifications to the source code with your favorite text editor.
 
We recommend keeping one open branch per new feature that you are adding into GEOS-Chem.  This lets you test each individual feature separately.  After each feature has been validated, you may [[#Merging|merge each individual branch]] back into the master branch.
 
=== Merging ===
 
When you are ready to merge your changes back into the mainline '''master''' branch, then you can follow this procedure.
 
# Switch back to the '''master''' branch by selecting '''Branch/Checkout''' from the menu (or type  '''CTRL-O''').  You will be given a dialog box of available branches.  Select '''master''' and click Checkout.
# From the menu, pick '''Merge/Local Merge''' (or '''CTRL-M'''). You will be given a dialog box of available branches. Select the branch you would like to merge into '''master''' and click Merge.
 
This should merge your changes back into '''master'''.  If you then start the [[#Viewing the revision history|'''gitk''' viewer]], you should see your changes merged into the '''master''' branch.
 
=== Resolving conflicts caused by a merge ===
 
Sometimes you may encounter a conflict when merging one branch into another branch.  This can happen when you are merging code from an older GEOS-Chem version into the latest version.  A conflict is just Git saying, "I found some code in a place where I didn't expect to find it.  Can you help me figure out which lines of code to keep and which to throw away?"
 
When you encounter a conflict, open the '''git gui''' window. You will see each file containing a conflict listed in the '''Unstaged Changes''' window.  Clicking on each file will display the lines of code where the conflicts are located.  You will see one or more '''slugs''' in the file.  A slug is a block of text that displays the source code from the old branch and the new branch.
 
<<<<<<< HEAD
! This is old source code that already exists in the branch
...
=======
! This is new source code that is being merged into the branch
...
>>>>>>> 77976da35a11db4580b80ae27e8d65caf5208086
 
At the top of the slug you see the string <tt><<<<<<< HEAD</tt> followed by some source code.  This is the "old" code, i.e. the code that existed as of the last commit.  A separator line <tt>=======</tt> then follows the source code.
 
Underneath the separator line, you will see the "new" source code, i.e. the code that we are merging into the branch.  This source code is followed by the text <tt>>>>>>>> 77976da35a11db4580b80ae27e8d65caf5208086</tt>.  The long numeric string is the SHA1 ID (the internal ID # used by Git) corresponding to the commit that we are merging into the branch.  Each commit has a unique SHA1 ID.
 
To resolve a file containing conflicts, do the following:
 
# Open the file in your favorite text editor (vi, emacs, etc.)
# Search for the word '''HEAD'''.  This will take you to the location of each slug (where conflicts exist).
# Decide which code that you want to keep.
# Delete the code that you do not want to keep.
# Delete the lines <tt><<<<<<< HEAD</tt>, <tt>=======</tt>, and <tt>>>>>>>> 7797..</tt>.  If you keep these in the source code you will get compilation errors.
# Repeat this process for each conflict that you find.
 
Once you have resolved the conflicts in each file, you can [[#Committing|commit them back into the repository]].
 
--[[User:Bmy|Bob Y.]] 16:17, 28 July 2011 (EDT)
 
=== Tagging ===
 
Git allows you to tag a particular commit with an alphanumeric string for easy reference.  This tag will allow users to just refer to the tag name using '''git pull'''. 
 
Tagging can be done in one of two ways.  You can add a tag via the command line:
 
    git tag GEOS-Chem v10-01
    git tag GEOS-Chem TAG_NAME
 
etc. at the Unix command line.
 
You may also add a tag via the '''gitk''' viewer utility, as follows:
 
# Open the gitk browser:
#* Type <tt>gitk</tt> (to view the current branch), or
#* Type <tt>gitk --all</tt> to view all branches.
# In the top-left window select a commit by clicking on it with the mouse
# Right-click on the text of the commit to pull up the context menu.  Select the '''Create tag''' option.
# Type in the name of your tag and click Create
 
You can remove a tag via the command line:
 
    git tag -d TAG_NAME
 
NOTE: Tagging is something that typically only the [[GEOS-Chem Support Team]] will do.
 
=== Deleting branches ===
 
Once you have merged your changes back into the '''master''' branch, you may delete the branch you just created.  In the '''git gui''', go to the '''Branch/Delete''' menu item.  You will be given a dialog box where you can select the name of the branch you wish to delete.
 
== Sharing your revisions with others (and vice versa) ==
 
One of the really nice features of Git is that it can create '''patch files''', or files which contain a list of changes that can be imported into someone else's local Git repository.  Using patch files totally obviates the need of having to merge differences between codes manually.
 
=== Creating a patch file to share with others ===
 
To create a patch file containing the code differences between a branch of your code with your '''master''' branch, or since  type the following text:
 
git format-patch master..BRANCH_NAME --stdout > my-patch-file.diff
 
where <tt>BRANCH_NAME</tt> is the name of the branch that you want to compare against the '''master''' branch.
 
You can also create a patch file for a given number of past commits.  Typing:
 
git format-patch -3 --stdout > my-patch-file.diff
 
will create a patch file for the last 3 commits.  If you want the most recent commit then use -1 instead, etc.
 
These commands will pipe the output from the '''git format-patch''' command to a file named by you (in this case <tt>my-patch-file.diff</tt>, but you may select whatever name you wish).  You can then include the patch file as an email attachment and send it to other GEOS-Chem users, or the GEOS-Chem Support Team.
 
'''''When sending patch files to others, it is important that you specify the parent commit (i.e. the commit that immediately precedes where the patch was made) for your patch file.'''''
 
=== Checking the validity of a patch file ===
 
Other users can also send you their source code revisions as patch files.  If you want to check the status of a Git patch file (i.e. what it will actually do) before you apply it to your repository, you can use the <tt>git apply</tt> command as follows:
 
% git apply --stat my-patch-file.diff
  GeosCore/aerosol_mod.f |    7 ++++---
  1 files changed, 4 insertions(+), 3 deletions(-)
 
The sample output listed above indicates that the patch contained 4 insertions and 3 deletions from only one file (<tt>aerosol_mod.f</tt>).
 
Note that the <tt>git apply --stat</tt> command does not apply the patch, but only shows you the stats about what it'll do.  For more detailed information about the patch, you can open it in a text editor and examine it manually.
 
You can also find out if the patch will install in your Git repository, or if there will be problems.  You can also use the <tt>git apply</tt> command to do this:
 
git apply --check my-patch-file.diff
 
The most often error that is encountered is that the patch was made from an earlier version of GEOS-Chem.  In that instance the situation can usually be rectified by having the sender of the patch do a <tt>git pull</tt> to the last-released GEOS-Chem version and then to create the patch again.
 
=== Reading a patch file into your local repository ===
 
To ingest a patch file into your local Git repository you should first [[#Creating branches|make a new branch]].  Follow this procedure:
# Pick '''Branch/Create''' from the menu (or type '''CTRL-N''').  Give your branch a descriptive name like <tt>Updates_from_xxxx</tt>" that will serve as a mnemonic.
# Pick '''Branch/Checkout''' from the menu (or type '''CTRL-O''') and switch to the branch you just created.
# To ingest the other person's source code changes, type:
 
      git am < their-patch-file.diff
 
You can then test the other person's revisions in the separate branch until you are sure they are OK.  Once satisfied with the changes, you can [[#Merging|merge them back into the '''master''' branch]] as described above.
 
--[[User:Bmy|Bob Y.]] 13:36, 2 October 2013 (EDT)
 
==== Invalid email address error ====
 
If you get the the following error while trying to run the command <tt>git am < their-patch-file.diff</tt>:
 
      Patch does not have a valid e-mail address.
 
Then use this command instead:
 
      git apply their-patch-file.diff
 
which should ingest the changes from the patch file into your repository.  Why the difference?  Long story short:
 
*If <tt>their-patch-file.diff</tt> was created with the '''git format-patch''' command, then it will contain the name of the committer plus the commit log message at the top of the file.  The '''git am''' command uses this information to create the commit message in your repository. 
*If on the other hand, <tt>their-patch-file.diff</tt> was created in '''gitk''' by right-clicking on the '''Make patch''' menu entry, then it will lack the email address of the committer and log message.  This will confuse the '''git am''' command.  Using '''git apply''' will ingest the changes into your repository, but you will have to add the commit message yourself in the '''git gui'''.
 
--[[User:Bmy|Bob Y.]] 13:35, 2 October 2013 (EDT)
 
==== "Patch does not apply" error ====
 
If you get error output similar to this while trying to run the command <tt>git am < their-patch-file.diff</tt>:
 
error: patch failed: file.c:137
error: file.c: patch does not apply
error: patch failed: Makefile:24
error: libavfilter/Makefile: patch does not apply
Patch failed at 0001 PATCH DESCRIPTION
When you have resolved this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort
 
Then follow [http://www.pizzhacks.com/bugdrome/2011/10/deal-with-git-am-failures/ these instructions].
 
--[[User:Bmy|Bob Y.]] 14:04, 21 May 2014 (EDT)
 
=== More about patch files ===
 
For more information about Git patch files, please see the following links:
 
;[https://rails.lighthouseapp.com/projects/8994/sending-patches Sending Patches with Git]: A guide how to use the patch feature of Git to send your changes to another user.
;[http://ariejan.net/2009/10/26/how-to-create-and-apply-a-patch-with-git/ How to create and apply a patch with Git]: Another nice explanation of how to use Git to send patch files.
 
== Getting updates from the remote repository ==
 
When a new GEOS-Chem version is released, we recommend that you [[#Downloading a new GEOS-Chem version|download it into a new local directory]] with the '''git clone''' command.
 
However, there may be times when "patches" (i.e. minor updates to fix bugs or other issues) need to be applied to an existing GEOS-Chem version.  The easiest way to obtain patches is to use the '''git pull''' command, as follows:
 
# Change to your local code directory (e.g. <tt>Code.10-01</tt>).
# [[#Creating branches|Make a new branch]] named '''patch''' (or something similar).
# [[#Creating branches|Check out]] the '''patch''' branch.  Now we are ready to obtain the updates from the remote server.
# Use the '''git pull''' command to download the updated files. Type:
      git pull https://bitbucket.org/gcst/geos-chem master
# Try compiling GEOS-Chem and running for few time steps to make sure everything is fine.
# [[#Creating branches|Check out]] the '''master''' branch.
# [[#Merging|Merge]] the '''patch''' branch into your '''master''' branch.
# [[#Deleting branches|Delete]] the '''patch''' branch.
 
This will merge the changes from the '''master''' branch of the remote repository into your '''master''' branch.
 
--[[User:Bmy|Bob Y.]] 10:59, 17 September 2010 (EDT)
 
== Advanced Git usage ==
 
The following subsections describe how to perform some advanced functions with Git.
 
=== Reverting to an older state of the code ===
 
When you clone GEOS-Chem from the remote repository to your local disk space (with the <tt>git clone</tt> command), the repository will point to the most recent commit.  However, you may want to revert to an older state of the code.  Git allows you to do this very easily.
 
Let's assume that the latest version of the code is v10-01, but that you want to use version v8-03-01.  The procedure is as follows:
 
# Clone GEOS-Chem with '''git clone https://bitbucket.org/gcst/geos-chem Code.v10-01'''
# Open the gitk browser by typing '''gitk &''' at the command line.
# In the top-left window of gitk, find the commit that you want to revert to.  Usually this will be denoted with a yellow tag (e.g. '''v8-03-01''' or '''v8-03-01-benchmark''').  However, if there are any post-release patches, be sure you select the oldest one.
# Right click on the commit text to open a context menu.  Select '''Create new branch'''.
# A new dialog box will pop up asking you to name the branch.  Type '''Code.v8-03-01''' and press '''OK'''.
# Close gitk and open the Git GUI by typing '''git gui &'''
# From the Git GUI dropdown menu, select '''Branch / Checkout''', and then pick '''Code.v8-03-01'''.
 
That's it!  We now have two branches that represent different GEOS-Chem versions.
 
# The '''master''' branch represents the state of the code as of the v10-01 release
# The '''Code.v8-03-01''' branch represents the state of the code as of the v8-03-01 release. 
 
You can work on the '''v8-03-01''' branch as you wish.  You can create further branches off of the '''v8-03-01''' branch.  The nice thing about this method is that you can always revert to the latest release by just switching back to the '''master''' branch (with '''Branch / Checkout''' from the Git GUI dropdown menu).
 
You can also use this same method to check out older versions of files in any of the [http://acmg.seas.harvard.edu/geos/doc/man/chapter_2.html#DownRun GEOS-Chem run directories].
 
--[[User:Bmy|Bob Y.]] 09:46, 30 June 2011 (EDT)
 
=== Adding a patch that was made to a previous version ===
 
Let's say you are currently working on GEOS-Chem v10-01, and somebody gives you a patch that they added into their own GEOS-Chem v8-03-02 code. You can add the patch into your v10-01 code in such a way that the modification will be at the head of the revision history. Here is the procedure.
 
:1. If you haven't done so already, clone the current v10-01 repository
 
    git clone https://bitbucket.org/gcst/geos-chem Code.v10-01
    cd Code.v10-01
 
:2. Start the Git GUI interface:
 
    git gui &
 
:3. Start the Gitk browser. From the dropdown menu in Git Gui, select:
 
    Repository / Visualize All Banch History
 
:4. In the Gitk revision, look for the parent commit of the patch in the revision history (upper-left) window. The parent commit is the one immediately preceding the patch. If you are not sure where the parent commit is, you can ask the person who sent you the patch.
 
:5. We will create a new branch from the parent commit into which the code updates will be placed. Once you have found the parent commit, right click on the commit text to open a context menu. Select:
 
    Create new branch  (name it '''patch-install-point''' and hit '''OK''')
 
:6. We need to [[#Switching between branches|checkout]] (i.e. switch to) the new branch. Go back to the Git GUI.  From the dropdown menu, select:
 
    Branch / Checkout (and then click on '''patch-install-point''')
 
:7. Locate the patch file that contains the update you wish to add to the code. Let's assume that this is called <tt>patch-file.diff</tt>.  We will now apply this to your source code directory:
 
      git am < ~/my_patch_directory/patch-file.diff
 
:NOTE: <tt>patch-file.diff</tt> does not have to be in the source code directory. It can be anywhere, as long as you specify the full file path. Here we assume it’s in <tt>~/my_patch_directory</tt>.)
 
:8. In the Git GUI, press the F5 key to refresh the display.
 
:9. In the GitK browser, press the F5 key to refresh the display.
 
:10. Now we want to merge the '''master''' branch into the '''patch-install-point''' branch. This will bring in all of the previous commits from the '''master''' branch into the '''patch-install-point''' branch, while keeping the new commits from the patch at the top of the revision history. Switch to the Git Gui window and pick from the menu:
 
      Merge / Local Merge (and then click on '''master''')
 
:11. The merge may result in some conflicts in some source code files. A conflict is a difference in the source code which Git cannot rectify. Most often conflicts are caused by 2 comments having the same number. Git will add the following lines to the source code:
 
    <<<<<HEAD
    ... lines of existing code ...
    =====
    ... lines of new code ...
    >>>>>
 
:If there are conflicts, you will have to go through these manually. You can just hand-edit the source code files with your favorite text editor.  If there are no conflicts, you can skip ahead to Step 14.
 
:12. Once you have finished resolving all conflicts, commit the modified files to the repository.  In the Git Gui, click on each of the files in the “Unstaged Changes” window (this will tell Git to commit them to the repository). Then click on the “Sign off” button and click on the “Commit” button.
 
:13. At this point you will have 2 branches. The '''master''' branch represents the pristine, unmodified code from the remote repository. The '''patch-install-point''' branch represents '''master''' branch plus the code from the patch that we added.
 
:14. Test the code in '''patch-install-point''' to make sure that it is functioning properly (i.e. run a benchmark simulation or a short test run).
 
:15. Once you are certain that the code in '''patch-install-point''' is good, then merge '''patch-install point''' back into the master branch. From the Git GUI dropdown menu:
 
  Branch / Checkout    and then click on '''master'''                # Switches to the master branch
  Merge / Local Merge  and then click on '''patch-install-point'''  # Merges patch-install-point into master
  Branch / Delete      and then click on '''patch-install-point'''  # Deletes patch-install-point branch   
 
--[[User:Bmy|Bob Y.]] 09:58, 17 August 2011 (EDT)
 
=== Cherry-picking individual commits from another branch ===
 
Git allows you to '''cherry-pick''' commits, that is to pull a single commit from a different branch into the branch you are currently working on.  This can prove useful in many situations.  For example, a colleague may have committed a critical bug fix into his or her development version of GEOS-Chem.  You may want to only grab that particular bug fix into your current branch without also getting all the other changes that your colleague made.
 
The best way to cherry-pick commits is via the '''gitk browser'''.  Here is a simple example.  Let's assume the following:
 
#You're working in branch '''my_branch''' of your local GEOS-Chem code directory. 
#You've pulled the branch containing your colleague's bug fix update into a new branch of your local code directory called '''Bug-fix-branch'''. 
#You are only interested in merging the commit labeled <tt>"Remove obsolete LAVHRRLAI and LMODISLAI from input.geos"</tt> into '''my_branch'''.
 
Open the '''gitk browser''' by typing this at the command line:
 
gitk
 
You will then see this revision history table:
 
[[Image:Cherry_pick_1.jpg]]
 
 
As you can see, '''my_branch''' is displayed in boldface, which indicates that is the current checked out branch. 
 
To cherry pick the your desired commit (<tt>"Remove obsolete LAVHRRLAI and LMODISLAI from input.geos"</tt>) into '''my_branch''', point to it with your cursor and press the right mouse button.  You will see a context menu pop up.  Select the '''Cherry-pick this commit''' option, as shown in this screenshot:
 
[[Image:Cherry_pick_2.jpg]]
 
 
This will bring only the selected commit into '''my_branch''', as shown in the following screenshot.  Note that '''my_branch''' now displays higher than '''Bug-fix-branch''' in the '''gitk browser''' revision history window, because it now has the most recent commit.
 
[[Image:Cherry_pick_3.jpg]]
 
 
If the commit that you brought into '''my_branch''' comes from a base version of GEOS-Chem that is significantly different than the your version,  the cherry-pick operation may result in a conflict.  In this case, Git will ask you to decide which lines of code you want to keep, and which lines of code you want to discard.  For more information about Git conflicts, please see the [[#Resolving_conflicts_caused_by_a_merge|''Resolving conflicts caused by a merge'' section above]].
 
--[[User:Bmy|Bob Y.]] 16:38, 11 October 2013 (EDT)
 
== In summary ==
 
We recommend using the '''git gui''' because of its user-friendly interface.  The following operations are best done from the GUI interface:
 
# [[#Creating branches|Creating and checking out branches ]]
# [[#Committing|Committing code]]
# [[#Merging|Merging code]]
# [[#Deleting branches|Deleting branches]]
# [[#Viewing the revision history|Examining revision history]] (you may also use '''gitk''' as standalone)
 
The following operations are best done from the command line:
 
# <tt>git clone</tt>:&nbsp; [[#Initial download|Initial download of repository]]
# <tt>git push</tt>:&nbsp; Send changes to a remote repository
# <tt>git pull</tt>:&nbsp; [[#Getting updates from the remote repository|Get changes from a remote repository]]
# <tt>git tag</tt>:&nbsp; [[#Tagging|Attach a label to a particular commit]]
# <tt>git format-patch</tt>:&nbsp; [[#Creating a patch file to share with others|Create a patch]]
 
--[[User:Bmy|Bob Y.]] 10:14, 19 March 2010 (EDT)

Latest revision as of 17:31, 21 June 2019

Redirect to:

Retrieved from "https://wiki.seas.harvard.edu/geos-chem/index.php?title=Using_Git_with_GEOS-Chem&oldid=43244"