Interfacing GEOS-Chem with KPP

From Geos-chem
Revision as of 22:02, 3 June 2014 by Melissa Payer (Talk | contribs) (For GEOS-Chem v9-02 and higher versions)

Jump to: navigation, search

This page describes how to install and run KPP, and how to interface it with GEOS-Chem.

Note: The interface between KPP and GEOS-Chem was changed in version 8-02-04. The differences implied in how to interface GEOS-Chem with KPP between (1) version 8-02-03 and (2) versions 8-02-04 and higher are explicitly given in the adequate paragraphs.

Installing KPP and Running the examples

The source code, examples and the documentation to install and run KPP are available directly from A. Sandu web page.

For version 2.2.1 of KPP to work with GEOS-Chem, you must modify the source code so duplicate and proportional reactions in the input files will trigger a warning instead of an error. (Thanks to Paul Eller.)

In the file kpp/src/scanner.c , search for the following line of code around line 665 (may be slightly different):

ScanError( "Duplicate equation: "
           " (eqn<%d> = eqn<%d> )", i+1, EqnNr+1 );

and change it to the following:

ScanWarning( "Duplicate equation: "
             " (eqn<%d> = eqn<%d> )", i+1, EqnNr+1 );

Then replace :

       ScanError( "Linearly dependent equations: "
                  "( %.0f eqn<%d> = %.0f eqn<%d> )",
                  r1, i+1, r2, EqnNr+1 );


       ScanWarning( "Linearly dependent equations: "
                    "( %.0f eqn<%d> = %.0f eqn<%d> )",
                    r1, i+1, r2, EqnNr+1 );

This should allow you to create the KPP model. Having duplicate and proportional equations should not be a problem for KPP.

(1) Installation of KPP is simple. You need to double check the location of the flex library. Ask your system administrator, or just use the "find" command.

(2) Running examples should not be a problem either. The kpp executable being on the $path, you just need to be in the directory were the model file (*.kpp) is to run kpp on it. (Some examples names are different between the distribution and the manual, but it is straightforward to figure it out.)

Generating KPP input files from GEOS-Chem globchem.dat

"" is a Perl script from Paul Eller that automatically generates the three input files for KPP from globchem.dat:

> globchem.dat

the script is available in two versions, one for the original globchem.dat format (, one for the new format used by Fabien Paulot for the alternate isoprene chemistry (

this will create 3 files (globchem.def, globchem.eqn, globchem.spc). Then you must use "globchem" for the MODEL flag in the *.kpp file. So create a "gckpp.kpp", with a rosenbrock solver, like that:

#MODEL      globchem
#INTEGRATOR rosenbrock
#LANGUAGE   Fortran90
#DRIVER     none
#HESSIAN    on

The "none" driver is enough to get the files needed for GEOS-Chem. We are not generating a standalone code.

For GEOS-Chem v9-02 and higher

The improved HO2 uptake by aerosol update that went into GEOS-Chem v9-02 introduced the following reaction in globchem.dat:

A    0 3.30E+01  2.0E-01      0 0 K   0.00     0.     0.         
      HO2           +                                                     
=                   +                   +                   +             
+                   +                   +                   +             
+                   +                   +                   +             
+                   +                   +                   +

KPP doesn’t like that there are no products listed for this reaction. To get around this, run on globchem.dat. Then, find the HO2 reaction in globchem.eqn and change it from:

{272} HO2 =  :                                         EXTARR(3.30E+01, 2.0E-01, 0.0);


{272} HO2 = DUMMY :                                    EXTARR(3.30E+01, 2.0E-01, 0.0);

You will also need to add the following line to the end of the globchem.spc file:

    DUMMY           =          IGNORE;

Once you have made those modifications, you should be able to run KPP by following the instructions in the next section.

--Melissa Sulprizio 17:58, 3 June 2014 (EDT)

Running KPP

Put the gckpp.kpp file and the globchem* files in the same directory, and call kpp there:

> kpp gckpp.kpp

this will generate all the necessary files:

gckpp_Function.f90 (*) 
gckpp_Global.f90  (*)
gckpp_Initialize.f90  (*)
gckpp_LinearAlgebra.f90  (*)
gckpp_Rates.f90  (*)
gckpp_Util.f90 (*)

(*) are modified in the next step. The following are also generated but not needed for GEOS-Chem (but keep


To the 17 files above, you must add two more, gckpp_comode_mod.f90 and Makefile, that you can copy from an existing one in a distribution of GEOS-Chem.

For v8-02-03: Copy the files from the v8-02-03 GEOS-Chem distribution, KPP/43t/gckpp_comode_mod.f90, and KPP/43t/Makefile. They do not need to be modified.

For v8-02-04 and higher: Copy the files from the current GEOS-Chem distribution, KPP/standard/gckpp_comode_mod.f90, and KPP/standard/Makefile. They do not need to be modified.

Interfacing the generated Code into GEOS-Chem

There is two steps: modifying the generated kpp files, and modifying GEOS-Chem code.

Modify kpp-generated files

We have two categories of modification : one specifically to interface with GEOS-Chem, and the other to work with OpenMP. The list of modifications is:

   	after declaration of variable A, add:
   (i) add following declarations:
   ! VAR_ADJ - Concentrations of variable species (global) [**]
     REAL(kind=dp) :: VAR_ADJ(NVAR)
   ! V_CSPEC - Concentrations of variable species (global)
     REAL(kind=dp) :: V_CSPEC(NVAR)
   ! V_CSPEC_ADJ - Concentrations of variable species (global) [**]
     REAL(kind=dp) :: V_CSPEC_ADJ(NVAR)
   ! NJ - Number of cost function being evaluated [**]
   ! NTT - Total number of tropospheric grid cells
   ! JLOOP - Total number of tropospheric grid cells
   ! SMAL2 - Parameter for insuring positive tracer values, same as in reader.f
     REAL(kind=dp), PARAMETER :: SMAL2 = 1.0d-99 
   ! NCOEFF - Number of reaction rate coeff adjoints [**]
   ! VAR_R_ADJ - Concentrations of reaction rate adjoint (global) [**]
     REAL(kind=dp) :: VAR_R_ADJ(NCOEFF)
   ! JCOEFF - Reaction numbers for each (define in INIT_KPP) [**]
   ! IND - Reaction numbers for each (define in INIT_KPP)
   (ii) and to work with OpenMP:
   ! Move stack_ptr here and make THREADPRIVATE for OMP parallelization (dkh, 07/28/09) 
     INTEGER :: stack_ptr = 0 ! last written entry
   !$OMP THREADPRIVATE( stack_ptr )
   (iii) and comment the equivalence for OpenMP:
   ! VAR, FIX are chunks of array C
         ! EQUIVALENCE( C(1),VAR(1) )
         ! EQUIVALENCE( C(88),FIX(1) )
   Note: variables indicated with [**] are for the adjoint only, and
   can be deleted... or kept if the adjoint integrator may be used.    
   rewrote subroutine as:
   SUBROUTINE Initialize ( )
     USE gckpp_Global
     USE gckpp_Util,     ONLY : Shuffle_user2kpp
     USE gckpp_Monitor
     INTEGER :: i
     CALL Shuffle_user2kpp(V_CSPEC,VAR)
     DO i = 1, NFIX
        FIX(i) = 1.d0
     END DO
     ! these two loops are for the adjoint only
     DO I =1, NVAR
     DO I = 1, NFIX
        C(NVAR+I) = FIX(I)
     END DO
   END SUBROUTINE Initialize    
   	add THREADPRIVATE for the two SAVE variables of the 
   	function WLAMCH
   !$OMP THREADPRIVATE( Eps, First )
   gckpp_Rates.f90 for v8-02-03
   (i) comment all rate law functions and update_sun
   (ii) reduce UPDATE_RCONST to:
          SUBROUTINE Update_RCONST ( )
            USE gckpp_COMODE_MOD, ONLY : R_KPP
            USE gckpp_Monitor
            INTEGER :: N
            DO N = 1, NREACT
              RCONST(N) = R_KPP(JLOOP,IND(N))
            END DO
   (iii) reduce UPDATE_PHOTO to a stub:
             SUBROUTINE Update_PHOTO ( )
                USE gckpp_Global
             END SUBROUTINE Update_PHOTO
   gckpp_Rates.f90 for v8-02-04 and higher
   (i) comment all rate law functions and update_sun
   (ii) reduce UPDATE_RCONST to:
          SUBROUTINE Update_RCONST (R_KPP)
            USE gckpp_Monitor
            ! INPUT ARGUMENT:
            REAL*8, INTENT(IN) :: R_KPP(:,:)
            INTEGER :: N
            DO N = 1, NREACT
              RCONST(N) = R_KPP(JLOOP,IND(N))
            END DO
   (iii) reduce UPDATE_PHOTO to a stub:
             SUBROUTINE Update_PHOTO ( )
                USE gckpp_Global
             END SUBROUTINE Update_PHOTO

   The modifications here is not always needed. It was 
   needed for the standard 43 tracers and for the Fabien
   Paulot alternative isoprene chemistry, but not for the
   54 tracers simulation .
   The problem was an initialization issue. some tracers
   are not initialized in subroutine shuffle_user2kpp of
   gckpp_Util.f90. The non-initialization was leading to 
   different results with 1 and 4 processors. The fix 
   consists in forcing the initialization of dead species
   to 1d-99, and of active species to their original value
   in the gckpp_Initialize.f90. See this discussion.

   To proceed: (i) check which element of V() is not 
   initialized in shuffle_user2kpp, then (ii) by cross
   referencing globchme.dat and the kpp-generated
   file, check which ones of the missing index are dead and
   which ones are active, or (ii) check gckpp_Initialize.f90
   to see which index is not initialized (dead).

   Here are the solutions we used so far:

   For the standard 43 tracers simulation, we need:


   For Fabien Paulot alternate isoprene chemistry,
       V(41, 43) = 1d-99
       V(50, 93, 98) = 1d-20

Modify GEOS-Chem

Most of it is already done. Now, depending on what kind of globchem.dat you are modifying, several scenario are possible:

(1) you are modifying an existing simulation. Then overwrite the 19 files in the corresponding subdirectory in the KPP directory of the GEOS-Chem distribution (e.g., KPP/standard/ or KPP/soa/). That's it.

(2) you are adding a new simulation or option that uses a new globchem.dat. You need to create a new subdirectory in the KPP directory, and put the 19 kpp files there. That's it, you can use the new simulation/option by calling :

   make CHEM=<subdirectory name>

--phs 14:23, 16 October 2009 (EDT)