This is the main wiki page for the GEOS-Chem/GCAP model.
What is GCAP
GCAP is short for "Global Change and Air Pollution". It uses simulated climate data from GCMs to drive the chemical transport model GEOS-Chem to simulate present-day and future air quality.
How to run GCAP
The code used for GCAP in this wiki is GEOS-Chem v08.03.01. This version has more development based on GEOS-5 meteorological fields than GCAP. However, we can still use the code of this version by adding some switches for GCAP simulations.
1) Comment the force LAI option in 'GeosCore/ input_mod.f'.
Currently, there is no GCAP version MODIS LAI. We have to use AVHRR LAI instead.
#if !defined( GCAP ) ! Force to use MODIS LAI if we use MEGAN. (ccc, 2/23/10) IF ( LMEGAN .OR. LMEGANMONO ) THEN LMODISLAI = .TRUE. LAVHRRLAI = .FALSE. WRITE(6,'(/,a,/)') 'Force to use MODIS LAI for MEGAN.' // & ' AVHRR LAI will not be used' ENDIF #endif
2) Revise 'GeosCore/ nei2005_anthro_mod.f' for NEI2005 emission.
a) Currently, there is no switch for GCAP to use NEI2005 emission. However, the emission file for GEOS4 has the similar data structure, so we can add a switch for GCAP by using GEOS4 emission.
#if defined( GEOS_5 ) SNAME = 'GEOS5' #elif defined( GCAP ) SNAME = 'GEOS4' #elif defined( GEOS_4 ) SNAME = 'GEOS4' #elif defined( GEOS_3 ) SNAME = 'GEOS3' #endif
b) NEI2005 uses the VISTAS emission by default. However, it only offers the data from 1999 to 2007. So it will be a problem for the GCAP simulation beyond this time period, especially for the future simulations. To solve this problem, we may fix the year of the emission data.
#if !defined( GCAP ) WRITE( SYEAR, '(i4)') THISYEAR #else WRITE( SYEAR, '(i4)') 2002 #endif
3) Revise 'GeosCore/ toms_mod.f'.
GEOS-5 uses files from 'TOMS_200906'. However, GCAP uses files from 'TOMS_200701'.
! Define filename (with replaceable tokens) #if !defined( GCAP ) FILENAME = 'TOMS_200906/TOMS_O3col_YYYY.' // GET_NAME_EXT_2D() // & '.' // GET_RES_EXT() #else FILENAME = 'TOMS_200701/TOMS_O3col_YYYY.' // GET_NAME_EXT_2D() // & '.' // GET_RES_EXT() #endif
Build GCAP executable
1) Uncomment the GCAP definition line in 'Headers/define.h'. Comment other definition line (e.g. GEOS5, GEOS4, GEOS3)
!----- Model types ----- #define GCAP 'GCAP' !#define GEOS_3 'GEOS_3' !#define GEOS_4 'GEOS_4' !#define GEOS_5 'GEOS_5'
2) In the main directory, type 'make realclean' to remove all the dependent and objective files away from each directory.
3) Type 'make' to build the executable file
To run the GCAP correctly, you need to download proper emission files, meteorological files, control files, initial/restart files, and information files.
1) Emission files
The emission files for GCAP are created on 72×45 grids, different from the 72×46 grids used in GEOS-5 simulations. Most of the GCAP emission files have names with 'gcap.4x5', which will be identified by GEOS-Chem model automatically if the switch for GCAP simulation is on in 'Headers/define.h'.
2) Meteorological files
GCAP use simulated meteorological fields from climate models as input. Currently, we can run GCAP with model data from the NASA/GISS Model 3 and the NASA/GISS Model E. Here is a list of GCAP met fields.
3) Control file 'input.geos'
a) Change the data directory path.
Root data directory : /as/group/gcap/data/GCAP_4x5/ => GCAP subdir : AGRID/YYYY/MM/ => GEOS-3 subdir : GEOS_3/YYYY/MM/ => GEOS-4 subdir : GEOS_4_v4/YYYY/MM/ => GEOS-5 subdir : GEOS_5/YYYY/MM/
In this example, the emission files are located in "/as/group/gcap/data/GCAP_4x5/" and meteorological files are located in subdirectory "AGRID"
b) Change the NOx menu.
=> Use lightning NOx? : T => Scale glb flrate?: F => OTD reg redist? : F => OTD loc redist? : F => Use CTH param? : T => Use MFLUX param? : F => Use PRECON param?: F
c) Use AVHRR LAI instead of MODIS LAI.
Use AVHRR-derived LAI? : T Use MODIS-derived LAI? : F
d) Do not use variable tropopause.
Use variable tropopause?: F
e) Use climatological monthly mean BC/OC emission which is not from GFED2
=> Use GFED2 biomass? :--- => monthly GFED2? : F => 8-day GFED2? : F => 3-hr GFED2? : F => synoptic GFED2? : F
4) Initial/restart files
Create proper initial/restart file with GAMAP rewrite_agprod. Make sure to use the right 'tau0', tracer number, and grid resolution. Commands in this subsection need typing in IDL.
a) Change time information (tau0)
A window will prompt out for you to choose the restart file whose 'tau0' you want to change into 'YYYYMMDD'.
b) Change spatial resolution (if necessary)
For example, you have an old restart file named 'restart_gprod_aprod.1996070100'. You want to interpolate into GCAP grid.
regridh_restart, INFILENAME='restart_gprod_aprod.1996070100', OUTFILENAME='temp1', /GCAP, diagn=0 regridv_restart, INFILENAME='temp1', OUTFILENAME='restart.gcap.1996070100', /GCAP, diagn=0
For more information, refer to section '1.3 Renaming and Regridding APROD/GPROD restart files' in wiki page of File I/O with GAMAP
5) Information files
GCAP needs some information and parameter files, for example, 'tracerinfo.dat', 'diaginfo.dat', 'jv_atms.dat', and so on. These files need be placed in the same directory with 'input.geos', initial/restart files, and GCAP executable file.
GCAP outputs 'ctm.bpch.YYYYMMDD' and 'restart.gcap.YYYYMMDD' files at the time step determined by the schedule set in the output menu of 'input.geos' file. The 'ctm' file contains emission, concentration, and deposition amount of gas/aerosol tracers. You can use GAMAP to analyze data and plot figures. The 'restart' file can be used to restart the GEOS-Chem model in sequent simulations. It can also be used as initial conditions for GEOS-Chem after changing proper 'tau0' and spatial resolution.
Frequently Asked Questions
1) Where can I download GCAP codes and data?
GCAP is not a name of model. It uses simulated climate data from GCMs to drive the chemical transport model GEOS-Chem to simulate present-day and future air quality. For the GEOS-Chem, please contact Prof. Daniel J. Jacob to join the user community and access the code. For the driven data, you may download both meteorological fields of the NASA/GISS GCM3 and emission files in '/pub/gcap/GCAP_4x5' through public FTP access 'ftp.as.harvard.edu'.
2) Can I use GEOS_4x5 emission files and download only the AGRID data?
It is important to download both AGRID data and emission data for GCAP. The grid resolution for GCAP is 72x45, while GEOS-5 is 72x46. As a result, you may not run the GCAP successfully with emissions from GEOS-5 or GEOS-4.
3) I can not find the codes needed for revising, such as 'nei2005_anthro_mod.f'.
The code revision introduced in this Wiki is for GEOS-Chem version v08.03.01. We may already include these revisions in the newer versions.
4) How can I check the emission or meteorological files?
You may use GAMAP programs to check these files. For emission, you may use gamap command and select the emission file to check its content. For meteorological data, use test_met command instead to check both maximum and minimum values for each variable.
5) Where are the emissions for future simulation?
For some natural gas/aerosol (e.g. biogenic organic carbon aerosol), the GEOS-Chem model will calculate new emissions in response to climate change. However, for future anthropogenic emissions, please contact Loretta Mickley.
6) Where can I get a restart file to use or interpolate?
7) How can I generate initial files for future simulation?
The restart file for future can be easily created by GAMAP with the following command (used in IDL):
where YYYYMMDD is the date in the future. The GAMAP will prompt a window automatically for you to select a pre-existing restart file. You may use any present-day restart file as the pre-existing restart file but make sure they are in the same month. For example, if you would like to create restart file for 20460701, then you'd better use 19960701 (or 19970701, the year is not important). The model will spin-up some time and reach equilibrium within a short time.
Here is a list of GCAP user groups and their research projects. Please add your information to the table.
|User Group||Description||Contact Person||Date Added|
|IAP/CAS||GCAP Asia||Hong Liao||March 24, 2011|
--Bob Y. 14:35, 13 January 2011 (EST)