GAMAP tips and tricks
Usage of TRACERINFO.DAT and DIAGINFO.DAT
User A said he keeps getting this message:
% UPDATE_TRACER_DATAINFO: WARNING: Use_DataInfo appears independent from global array!
User B said:
my ctmbpch files have duplicate data blocks for some parameters. Something's wrong!
These are symptoms of diaginfo.dat or/and tracerinfo.dat that do not match the binary punch file (user B), or that the bpch file was created with inadequate diag/tracerinfo.dat files and end up with duplicate 999 tracers without tracername for example (user B). The solution is to use correct diag/tracerinfo.dat when reading and creating bpch files. GEOS-Chem now writes those files for each runs in your run directory. If you use them when reading run outputs, you will not have a problem.
The first time a GAMAP routine is used, it will look for and read these files. First, in the current directory, then in the !path variable (which means it will used the default ones in ../gamap2/input_files/). So, to read those corresponding to your run you can:
(1) start your IDL session in your run directory
(2) start your IDL anywhere, and then: cd, 'your_run_directory', before using GAMAP
(3) copy your diag/tracerinfo.dat from your run dir to your ../gamap2/input_files/ (i.e., overwrite default ones), before using GAMAP
(4) Advance users can also, at anytime in their session, force GAMAP to read specific diag/tracerinfo.dat:
ctm_diaginfo, /all, /force_reading, filename='your_diaginfo.dat' ctm_tracerinfo, /all, /force_reading, filename='your_tracerinfo.dat'
If you are using a default location, double check that it is really used with the following query:
--phs 15:52, 4 April 2008 (EDT)
Renaming and Regridding APROD/GPROD restart files
When using secondary aerosols, you need a restart_aprod_gprod.YYYYMMDDhh file. Unlike the general restart file used for GEOS-Chem runs, it cannot be simply renamed and ready to use for another simulation date.
Renaming APROD/GPROD restart files
You must rewrite you restart_gprod_aprod.YYYYMMDDhh so that the date in the filename is the same as the one in the datablock headers. A new routine in GAMAP v2.12 will do it for you: ../gamap2/date_time/rewrite_agprod.pro
Regridding APROD/GPROD restart files
You can regrid a 2ndary aerosol restart file with the same routines used to regrid the standard restart file. However you need to tell the routines to regrid all tracers with the keyword diagn=0 (which means "all tracers"):
regridh_restart, ..., diagn=0 regridv_restart, ..., diagn=0
--phs 14:51, 4 April 2008 (EDT)
Combining output from timeseries files
Ray Nassar (email@example.com) wrote:
- I just have a quick question, is there any GAMAP routine that can average all hourly data blocks in a timeseries file to make a single daily average bpch file?
- It appears like I could use the average option of ctm_sum.pro but I do not quite understand where the averaged data goes and afterwards would still have to write to bpch.
Philippe Le Sager (firstname.lastname@example.org) replied:
- Check the
- routines, which combines daily bpch files (nd48 & nd49 output, but also met field input files) into 4D data blocks. It has many options. You can extract a subset of data according to time and/or location, or process the data (moving average, daily max, shift to local time). You can either save the data into a new bpch file or just get an array of data in output.
- I wrote a tutorial that gives some pointers here.
--Bmy 09:43, 1 April 2008 (EDT)
Memory management and CTM_MAKE_DATAINFO
When using CTM_MAKE_DATAINFO, you create few pointers and allocate memory to pointed data. Three scenarios to free that memory are possible.
(1) By default, GAMAP keeps track of the pointers in a global structure, and you can clean up the memory by calling CTM_CLEANUP (with or without the keyword /NO_GC):
ctm_make_datainfo(data, ...) CTM_WriteBpch, DataInfo, FileInfo, FileName=file ctm_cleanup
(2) If you use the keyword /NO_GLOBAL when calling CTM_MAKE_DATAINFO, the story is a little bit more subtle. Now, GAMAP has no idea of the created pointers. If you use CTM_CLEANUP without the keyword /NO_GC, everything is clean up because there is a call to heap_gc. But you are also loosing **all other** pointers and objects.
ctm_make_datainfo(data, ..., /No_global) CTM_WriteBpch, DataInfo, FileInfo, FileName=file ctm_cleanup
Note if you do not call ctm_cleanup or call it with /No_GC, then the memory allocated by CTM_MAKE_DATAINFO is still allocated and the pointers that refers to it are alive... until you exit the routine (unless they are passed back). Once you are out of the routine, this memory remains allocated but is useless since unaccessible, in other words you have memory leak.
(3) So, if you want to keep some objects and/or pointers alive in your code (i.e., you do not want to call heap_gc or ctm_cleanup,/no_gc), you need to free only the created pointers as follows:
ctm_make_datainfo(data, datainfo, fileinfo, ..., /No_global) CTM_WriteBpch, DataInfo, FileInfo, FileName=file ptr_free, DataInfo.data ptr_free, fileinfo.gridinfo
To free only the heap memory created by multiple calls to CTM_MAKE_DATAINFO, the procedure is:
for D=0L, NTracers-1L do begin Success = CTM_Make_DataInfo( Data[*,*,D], DataInfo, FileInfo, ..., /No_Global ) ArrDataInfo = D eq 0l ? [ DataInfo ] : [ ArrDataInfo, DataInfo ] if D ne Ntracers-1l then ptr_free, Fileinfo.gridinfo endfor CTM_WriteBpch, ArrDataInfo, FileInfo, FileName=OutFileName for d=0, n_elements(ArrDataInfo)-1l do ptr_free, ArrDataInfo[d].data ptr_free, fileinfo.gridinfo
--phs 10:28, 13 February 2008