Photolysis mechanism
This page describes some of the updates to the FAST-J photolysis mechanism, as is currently implemented in GEOS-Chem.
Contents
Input files for FAST-J
The following input files are required for the FAST-J photolysis mechanism:
- ratj.d
- This file is where you specify each of the FAST-J photolysis species. Each species is mapped to a corresponding entry of the GEOS-Chem chemical mechanism.
- jv_atms.dat
- This file specifies the reference O3 climatology for FAST-J. NOTE: GEOS-Chem will overwrite this reference climatology with TOMS/SBUV data for those months and locations where such data exists.
- jv_spec.dat
- This file is where the various quantum yields and aerosol cross-sections are specified.
Overhead TOMS/SBUV merged O3 columns
GEOS-Chem v9-01-03
Jenny Fisher has updated to TOMS overhead O3 columns to account for years through December 2010. The data files are available at:
ftp://ftp.as.harvard.edu/gcgrid/geos-chem/data/GEOS_NATIVE/TOMS_201203/ ftp://ftp.as.harvard.edu/gcgrid/geos-chem/data/GEOS_2x2.5/TOMS_201203/ ftp://ftp.as.harvard.edu/gcgrid/geos-chem/data/GEOS_4x5/TOMS_201203/
You can download these directories with anonymous FTP or the Wget utility. For instructions, please see Chapter 2.4, Downloading the GEOS-Chem shared data directories in the GEOS-Chem Online User's Guide.
Modifications to subroutine READ_TOMS in toms_mod.F include changing the directory name and updating the final year from 2008 to 2010.
--Melissa Payer 14:01, 20 March 2012 (EDT)
GEOS-Chem v8-01-04
Bob Yantosca has updated the TOMS overhead O3 columns to account for years 2006 and 2007. The data files are available at:
ftp ftp.as.harvard.edu cd pub/geos-chem/data/GEOS_2x2.5/TOMS_200701/ get README get TOMS_O3col_2006.geos.2x25 get TOMS_O3col_2007.geos.2x25 cd pub/geos-chem/data/GEOS_4x5/TOMS_200701/ get README get TOMS_O3col_2006.geos.4x5 get TOMS_O3col_2007.geos.4x5
Also you will have to make a modification in the subroutine READ_TOMS in toms_mod.f. Replace the following lines:
! Use 2005 data after 2005
IF ( YEAR > 2005 ) THEN
WRITE( 6, 105 ) YEAR
YEAR = 2005
ENDIF
with these lines:
! Use 2007 data after 2007
IF ( YEAR > 2007 ) THEN
WRITE( 6, 105 ) YEAR
YEAR = 2007
ENDIF
This will make sure the code uses the files for 2006 and 2007.
Here is an excerpt from the README that describes the TOMS data set versions that we are currently using:
Data source and version:
-------------------------
1985 - 2005 are taken from:
http://code916.gsfc.nasa.gov/Data_services/merged/index.html
TOMS/SBUV MERGED TOTAL OZONE DATA, Version 8, Revision 3.
Resolution: 5 x 10 deg.
Contact person for the merged data product:
Stacey Hollandsworth Frith (smh@hyperion.gsfc.nasa.gov)
2006 and 2007 are taken from:
http://code916.gsfc.nasa.gov/Data_services/merged/index.html
Version 8 Merged Ozone Data Sets
Revision 04
DATA THROUGH: SEP 2008
LAST MODIFIED: 20 OCT 2008
NOTE: This fix was introduced into version v8-01-04.
--Bob Y. 14:15, 24 March 2009 (EDT)
O1D reaction updated to JPL 2006
The rate constants in the "FAST-J" jv_atms.dat file have been updated by Lin Zhang.
These were the old values:
O3_1d 180 9.500E-01 9.330E-01 4.270E-01 6.930E-02 6.060E-02 0.0 0.0 O3_1d 260 9.500E-01 9.420E-01 4.890E-01 1.360E-01 7.110E-02 0.0 0.0 O3_1d 300 9.500E-01 9.550E-01 5.870E-01 2.370E-01 8.570E-02 0.0 0.0
which are now replaced by the new values from JPL 2006:
O3_1d 180 9.000E-01 9.000E-01 3.824E-01 8.092E-02 7.650E-02 0.0 0.0 O3_1d 260 9.000E-01 9.000E-01 4.531E-01 1.438E-01 7.654E-02 0.0 0.0 O3_1d 300 9.000E-01 9.000E-01 5.273E-01 2.395E-01 7.659E-02 0.0 0.0
Also the new file has the following header line (the O1D update is noted there):
jv_spec.dat: FAST-J, std JPL 00 (mje 4/02) -- aer/dust (rvm, 3/02) -- O1D (lzh 5/06)
For more information, please contact Lin Zhang (linzhang@fas.harvard.edu).
--Bob Y. 14:49, 14 January 2009 (EST)
Cloud overlap options in FAST-J
GEOS-Chem now has 3 cloud overlap options in the FAST-J photolysis mechanism:
Linear cloud overlap assumption
The linear cloud overlap option is the default in GEOS-Chem versions v8-01-01 and prior. The option is:
Grid Box Optical depth = In-cloud optical depth * Cloud fraction.
Approximate random overlap assumption
This approximate random overlap option was introduced into the standard code in GEOS-Chem v8-01-02:
Grid Box Optical Depth = In-Cloud Optical Depth * ( Cloud Fraction )^1.5
Maximum random overlap assumption
This maximum random overlap option is much more computationally intensive, and therefore is not used as the default option. However, if you wish to use this option, then manually edit the fast_j.f source code file such that OVERLAP = 3.
The Maximum-Random Overlap (MRAN) scheme assumes that clouds in adjacent layers are maximally overlapped to form a cloud block and that blocks of clouds separated by clear layers are randomly overlapped. A vertical profile of fractional cloudiness is converted into a series of column configurations with corresponding fractions see Liu et al., JGR 2006; hyl,3/3/04).
For more details about cloud overlap assumptions and their effect on photolysis frequencies and key oxidants in the troposphere, refer to the following articles:
- Liu, H., et al., Radiative effect of clouds on tropospheric chemistry in a global three-dimensional chemical transport model, J. Geophys. Res., 111, D20303, doi:10.1029/2005JD006403, 2006.
- Tie, X., et al., Effect of clouds on photolysis and oxidants in the troposphere, J. Geophys. Res., 108(D20), 4642, doi:10.1029/2003JD003659, 2003.
- Feng, Y., et al., Effects of cloud overlap in photochemical models, J. Geophys. Res., 109, D04310, doi:10.1029/2003JD004040, 2004.
- Stubenrauch, C.J., et al., Implementation of subgrid cloud vertical structure inside a GCM and its effect on the radiation budget, J. Clim., 10, 273-287, 1997.
Discussion
Hongyu Liu wrote:
- I have a comment about how the effect of cloud overlap in the vertical may be included in GEOS-Chem. The standard GEOS-Chem assumes linear scaling of cloud optical depth with cloud fraction in a grid box, i.e., the grid average cloud optical depth TAU' = TAU * f, where TAU is the COD in the cloudy portion of the grid and f is cloud fraction in the layer. This linear assumption (LIN) not only introduces a significant bias because of the nonlinear relationship between J-values and COD, but also is not consistent with the cloud-radiation interactions taking place in the original GEOS-DAS. Current GCMs or DAS usually use random overlap (RAN) or maximum-random overlap (MRAN) in their cloud-radiation packages.
- Ideally, GEOS-Chem should use the same cloud overlap assumption as the one used in GEOS-DAS where TOA radiative fluxes have been validated against e.g. satellite observations. But the ("exact") random overlap and MRAN approaches are computationally expensive. Fortunately, the so-called "approximate" random overlap scheme [TAU' = TAU * f^(3/2) which is computationally cheap] has been demonstrated to be a good approximation to both the "exact" random overlap and MRAN calculations. For details, see my GEOS-Chem cloud paper (section 2.3 & Figures 8d,9d: http://research.nianet.org/~hyl/publications/liu2006_cloud1.abs.html
- So, if we don't want to use any cloud overlap assumptions because of computational cost, the "approximate" random overlap seems a good option - it makes more sense physically and is more consistent with the mother GCM or DAS. Actually it has been used in the MOZART model for years [see Brasseur et al., 1998].
- Hongyu Liu
For more information, please contact Hongyu Liu (hyl@nianet.org).
--Bob Y. 12:44, 23 May 2008 (EDT)
Updated aerosol optical properties
Please visit our new Aerosol optical properties wiki page for more information about:
- Description of aerosol optical properties in GEOS-Chem
- Aerosol optical properties update for v8-02-05
- Aerosol optical properties at high spectral resolution
--Bob Y. 11:07, 1 March 2010 (EST)
Scaling of AOD diagnostic output to other wavelengths
Colette Heald and Randall Martin have added a new capability to the GEOS-Chem v8-03-01 diagnostics that will facilitate comparing GEOS-Chem data to satellite observations. This was released as a patch shortly after the release of v8-03-01.
The aerosol optical depth (AOD) output computed by the following diagnostics:
- ND21 (output to the ctm.bpch file)
- ND48 (timeseries station data)
- ND49 (instantaneous timeseries output)
- ND50 (24-hr timeseries output)
- ND51 (satellite timeseries)
- ND51b (satellite timeseries)
can now be scaled from 400nm (i.e. the FAST-J wavelength) to any arbitrary wavelength. A new file, jv_spec_aod.dat, has now been added to all of the GEOS-Chem v8-03-01 run directories. This file can be edited to contain the optical parameters for the aerosols at the target wavelength. Currently the default jv_spec_aod.dat is set up to scale AOD output from 400nm to 550nm.
For more information, please see the Section 5.4.4 of the GEOS-Chem v8-03-01 User's Guide. This contains information about how to edit jv_spec_aod.dat for other wavelengths.
It is important to note that this capability does not change the scientific results of GEOS-Chem, but is just a new option for the diagnostic output.
--Bob Y. 16:10, 28 May 2010 (EDT)
Too many levels in photolysis code
The scattering module (OPMIE.f) for Fast-J requires many additional vertical levels. It happens that the limit (NL set in jv_mie.h) can be reached in some situations, causing the program to stop with a "Too many levels in photolysis code.." error message. Sometimes you can increase NL to solve the problem.
Now a new version of OPMIE.f is available, which still warns you if NL is reached, but works with that limit.
This can also be an indication that there may be a problem in your visual optical depths, dust emissions, or aerosol emissions. Dust and aerosol optical depths are computed from the concentration array STT. If for some reason you end up emitting too much aerosol or dust (i.e. a unit conversion error), then this will result in an abnormally high dust or aerosol optical depth. A very high optical depth will cause FAST-J to want to keep adding points to the Gaussian quadrature in OPMIE.f. You can get into a situation where the number of points that FAST-J wants to add is greater than the array parameter NL (it may want to add thousands of points!).
Therefore, if you encounter this type of error, it is a good idea to doublecheck your aerosol & dust emissions to make sure that the monthly and annual totals are reasonable.
NOTE: in GEOS-Chem v8-03-01 we have updated the NL parameter from 750 to 1500, which should prevent this error from happening in most circumstances.
--Bob Y. 16:14, 28 May 2010 (EDT)
